|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
30-11-2009, 07:36 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2006
Location: Toowoomba
Posts: 2,634
|
need to know what way the standard fuel pump flows on the 1600 crossflow. does the angle peice at the top of the pump feed the carby or is it fed from the tank?
__________________
1628 Escort Project Thread 67.3 RWHP - Paramount Performance Dyno DJ Automotive Tuned with proper jets http://fordforums.com.au/showthread....4&page=1&pp=25 |
||
|
|
|
01-12-2009, 06:49 PM
|
#2 | ||
|
Regular Member
Join Date: Apr 2007
Location: Brisbane
Posts: 272
|
Don't know about your particular model, but they normally have in and out stamped on the pump.
__________________
When the flag drops... The bullsh!t stops... |
||
|
|
|
|
01-12-2009, 07:18 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2006
Location: Toowoomba
Posts: 2,634
|
not that i noticed
thanks though
__________________
1628 Escort Project Thread 67.3 RWHP - Paramount Performance Dyno DJ Automotive Tuned with proper jets http://fordforums.com.au/showthread....4&page=1&pp=25 |
||
|
|
|
|
02-12-2009, 10:23 AM
|
#4 | ||
|
Regular Member
Join Date: Nov 2008
Location: SA
Posts: 157
|
These standard mechanical pumps are a 'lift Pump' hold the pump as if it was fitted to the block the lower pipe goes to the tank, the upper pipe goes to the carb/fuel filter
If in doubt take the pump off, connect a pipe to one end dip in some fluid and operate the pump by hand...remember to clear the pump out before refitting to the engine Cheers Engine Guy |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
fuel pump flow direction?
Linear Mode
