AU UTE tow bar installtion help

[illusivedreams]

Hey guys.
Just got my self a second hand Tow bar Au UTE tub tray,

Now I received 11 small bolts all the same size about M8 or M10 I will confirm,

But it seems I also need 4 large bolts that mount to the chassis.

Am I correct?

If any one has photos they can post up that would be great.

I will takle some photos in the afternoon and post up so you can see what I have .

I would like to install this week :togo: but will see.

[cedric]

those 4 are allready on the car. your tow bar goes above (between rear hangers and chassis) rear leaf spring hangers .that is how mine is ,factory tow bar,au2

[illusivedreams]

Originally Posted by cedric

those 4 are allready on the car. your tow bar goes above (between rear hangers and chassis) rear leaf spring hangers .that is how mine is ,factory tow bar,au2

Buddy I'm sure you are right had a look at another AU and thats the way they have it done.

So it is all good But here is the photos of what I have does it look like there is enough? I think so .

The 2 low tensile bolts are a bit odd but : will sort out.

[illusivedreams]

Originally Posted by cedric

those 4 are allready on the car. your tow bar goes above (between rear hangers and chassis) rear leaf spring hangers .that is how mine is ,factory tow bar,au2

Although looking at it their seems to be 4 on each side yet when I looked at some ones leaf set up their is only two bolts aside

[illusivedreams]

All done yes there is 4 bolts already on Chassis waiting for you. To support leafes and two in front.