Remove front bar?????

[XRATE-UTERUS]

Has anyone got or seen a how to on removing the front bar on the 2001 XR6 AU ute?

dam type in the search and 16 pages comes up. be quicker just asking here.

[tickfrd6]

Yeh mate it's fairly simple. Under the front guards there are 4 screws on each side. Unscrew those then the ones under the bonnet. Lift from bottom and it's off. Unclip the black plastic under the guards first to get to the bolts mate

[LANKY 1]

and the ones under the bonnet

[JC]

And don't forget the scrivets for the plastic inner guards.

[Mont5.0]

and the ones under the front stone tray

[XRATE-UTERUS]

thanks guys

[XRATE-UTERUS]

what about ripping the dash apart? the part around the radio area?

dam so much info around here i cant find ****!

[JC]

Originally Posted by XRATE-UTERUS

what about ripping the dash apart? the part around the radio area?

dam so much info around here i cant find ****!

Search using dash fascia, or console or surround. I could type it all again, but better you search for it.

[tickfrd6]

The part around the radio area? As in the grey and black facia? Simple pull out the radio and ash tray. Two screws on each side where the radio was and also two screws where the ash tray was. The rest if held on by clips. Disconect all wires and it's off