|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-04-2011, 02:58 PM
|
#1 | ||
|
Regular Member
Join Date: Aug 2009
Location: Greensborough, vic
Posts: 150
|
Hey guys, I've got a AUIII xr front bar to put on my AUII forte. I test fitted it the other day while I had a spare couple of hours (still needs to be painted), and it seems one of the mounting points for the headlights + bar -the headlight mounting point closest to the grill- doesn't have a hole that lines up with it on my car. Did the XR's have extra holes? And is it as simple as tapping a new hole?
|
||
|
|
|
11-04-2011, 05:16 PM
|
#2 | ||
|
All Bran = Regular Member
Join Date: Feb 2006
Location: BrizVegas
Posts: 1,970
|
Yes, you'll need to drill a hole.
There's also a mounting bracket under each mudguard. You can use it (make up your own bracket) or not. I made the brackets but I think there are others who have not worried about them. IIRC the front bar has the potential to not align properly without the brackets. edit: found the thread from when I swapped mine over:- http://www.fordforums.com.au/showthread.php?t=11246213 |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
mounting AUII xr front > forte
Linear Mode
