|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-05-2011, 11:07 AM
|
#1 | ||
|
Starter Motor
Join Date: Jul 2010
Posts: 27
|
Hey guys,
I have a AU1 forte that was my car, til someone hit it; wrote it off and drove off. So i was left without a car and decided to use it as parts I just bought an AU3 forte. I would like to use the cruise control out of my AU1. Is it possible to just remove and put in the AU3? I hope so! Thanks in advance! |
||
|
|
|
02-05-2011, 11:12 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
no series one electrics are different from S2/3 including the steering wheel control interface thats why a S2/3 radio won't work properly in a S1
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty. "It is better to remain silent and be thought a fool than to speak out and remove all doubt." Start a new career as a bus driver Rides: FG2 XR6 stock at this stage but a very nice ride xc 4 DOOR X CHASER 5.8 UNDER RESTO |
||
|
|
|
|
03-05-2011, 01:15 AM
|
#3 | ||
|
Starter Motor
Join Date: Jul 2010
Posts: 27
|
Ahh thats a shame, no one knows if their possibly would be a way around it or too complicated? Looks like it would fit so easily too!
Oh well i hope i dont run into too many problems using my AU1 for parts... Enginewise it should be all about the same hey? |
||
|
|
|
|
03-05-2011, 01:16 AM
|
#4 | ||
|
Starter Motor
Join Date: Jul 2010
Posts: 27
|
What about if i use my module and see if i can get the cruise control wiring from the wreckers, would there be a chance that would work to save money?
|
||
|
|
|
|
03-05-2011, 10:30 AM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
AFAIK the clock spring is different and the wiring by the time you muck around you are better getting a complete cruise conversion from a wreckers or fleabay
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty. "It is better to remain silent and be thought a fool than to speak out and remove all doubt." Start a new career as a bus driver Rides: FG2 XR6 stock at this stage but a very nice ride xc 4 DOOR X CHASER 5.8 UNDER RESTO |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Cruise Control AU1->AU3
Linear Mode
