|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Pub For General Automotive Related Talk |
|
Thread Tools | Display Modes |
02-06-2011, 06:27 PM | #1 | ||
wild xr8
Join Date: Feb 2007
Location: bendigo
Posts: 903
|
hey guys
jus wondering if anyone has had to get an EPA exhaust check?? i have recieved a notice and it says it cant exceed 90db when stationary. jus wanting to know whats involved is all. is it tested at idle or high rpm??? cheers burkie |
||
03-06-2011, 07:12 AM | #3 | ||
FF.Com.Au Hardcore
Join Date: Feb 2011
Location: On The Footplate.
Posts: 5,086
|
Just make sure it's done in controlled conditions and in an open space, and not wth your car backup near a wall or with the "microphone" held close to the exhaust outlet to try and inflate the reading.
...not that I'm suggesting they'd even do anything like that... |
||
03-06-2011, 07:24 AM | #4 | ||
Moderator
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
|
The EPA have a rig at the specified distance that they place in the correct position at the rear of the vehicle. I remember it being 3/4 of the redline ... that was a while ago.
The noise test includes back-off as well ... so loud crackles WILL put you over for sure.
__________________
The Current Stable 2016 SZII TS Territory RWD Petrol The Evolution of the EGA54D utes AU Workshop Build thread of EGA54D B-Series Workshop Build thread of EGA54D 2004 SX TX Territory AWD - Gone but not forgotten 2010 FG XT "The ex-rental" - Moved onto a new home Mechan1k's Flickr Page |
||
03-06-2011, 07:32 AM | #5 | |||
AU DIE HARD
Join Date: Nov 2005
Location: Between 2nd and 5th gear
Posts: 5,073
|
In Vic you can get the test done at a licenced tester ( some exhuast shops) and forward the paper work to the EPA cost is about $80 but it will have to be with in the tolerance, most are fairly good and will let you know first if it is going to pass or not.
__________________
........Age and treachery will ALWAYS overcome youth and skill....... CORTINA 250 2V POWER soon to be AUXR8 Windsor pwrd .............WINDSOR WARLORD WHO CARRIES THE CLEVO MAFIA AND BROKEN BOSSES... .................................................. Quote:
|
|||
03-06-2011, 08:01 AM | #6 | ||
FF.Com.Au Hardcore
Join Date: Mar 2005
Posts: 7,769
|
Pan-o-Market (muffler place) in Shepparton is an authorised EPA checker. I am sure there will be one in Bendigo.
__________________
I reserve the right to arm bears
|
||
03-06-2011, 12:43 PM | #7 | ||
KITTY Crew Member
Join Date: Sep 2005
Location: WA
Posts: 5,267
|
In WA my engineer said to insist on a drive by test... But they did not test me at all when I got the permits??
__________________
FOR SALE BAII Super Pursuit 0083 Awsome power by XTREME FORD TUNING 500rwkw New ALLOY Block Awesome exhaust by THE EXHAUST CENTRE MIDLAND Awesome Kenne Bell Supercharger setup by AGRO! and Bluepower Racing Developments Now with full DOT approval and Permitted for road use
|
||
05-06-2011, 04:38 PM | #8 | ||
wild xr8
Join Date: Feb 2007
Location: bendigo
Posts: 903
|
gettin it done tomoz in bendigo. cost jus under 40, still a pain in the *** considering the police woman told me it was because there was water dripping out the back at 10pm after it had ran for 2 mins. guess she missed the science lesson on condensation
|
||
05-06-2011, 09:20 PM | #9 | |||
FF.Com.Au Hardcore
Join Date: Aug 2010
Location: Melbourne
Posts: 1,580
|
Quote:
|
|||
07-06-2011, 07:16 AM | #10 | ||
wild xr8
Join Date: Feb 2007
Location: bendigo
Posts: 903
|
yep that is the pathetic reason!! didn't get tested yesty, bloke said it wouldnt pass so i have had to go an get another rear muffler. will try today or tomoz an see how it goes
|
||
07-06-2011, 07:48 AM | #11 | |||
FF.Com.Au Hardcore
Join Date: Jun 2010
Posts: 504
|
Quote:
, this is exactly what the RTA tried on when i had my R32 GTR a couple of years ago. Enclosed shed with the meter jammed up the exhaust pipe. |
|||
07-06-2011, 10:24 AM | #12 | ||
FF.Com.Au Hardcore
Join Date: Feb 2011
Location: On The Footplate.
Posts: 5,086
|
Yep, I've seen reports of them sticking the microphone thing right into the end of the exhaust of things like old RD250LC's to try and fail them, and getting the expensive mike coated in oil... Not sure about how high they get you to rev, but I do remember something about 3/4 or redline, and people said "On the street who sits there in neutral with thier engine revving like buggery????" |
||
07-06-2011, 05:47 PM | #13 | |||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne, Australia
Posts: 2,602
|
The tester that did mine had a stand that was adjustable for height and was set at an angle horizontally to offset the microphone. Might be around half a metre away and perhaps a 30-45 degree angle?
Mine did fail, but they would re-test for free if they did the remedial work.
__________________
Quote:
|
|||
07-06-2011, 05:56 PM | #14 | ||
FF.Com.Au Hardcore
Join Date: Feb 2011
Location: On The Footplate.
Posts: 5,086
|
I'd say get a print out of the requirements for testing (distance from exhaust, height, making sure no reflecting surfaces nearby, how long since equipment calibrated, etc) and take it with you and make sure they follow it to the letter.
If you still fail, cop it on the chin. A quiet exhaust is quite possible with performance cars. I recall an R32 Skyline in Auto Salon magazine's "street car of the year" awards a few years back that not only passed all the roadworthy, braking, and legality requirements, but was actually quieter than the legal limit. ...and it put out 700hp... |
||
07-06-2011, 06:37 PM | #15 | ||
AFF Whore
Join Date: Apr 2009
Location: In between gas stations
Posts: 2,246
|
I think it's somewhere around the 90db mark, I know with my car I'd fail with flying colours. It's the way it barks coming down the rev range that would put it over... angry little bugger that it is.
|
||
09-06-2011, 07:00 PM | #16 | ||
wild xr8
Join Date: Feb 2007
Location: bendigo
Posts: 903
|
had my twin pipes over diff to the rear removed and a muffler added with a single 2inch outlet an it only just passed. 88db it went. a pic of the exhaust system was drawn an gets sent to the epa!!! so loong story short condensation set me back $165
|
||
10-06-2011, 01:23 AM | #17 | ||
FF.Com.Au Hardcore
Join Date: May 2009
Location: Benalla vic
Posts: 628
|
My brother borrowed a muffler to pass his, cost him $50
|
||
10-06-2011, 01:32 AM | #18 | |||
Banned
Join Date: Feb 2010
Location: Bat Cave
Posts: 1,237
|
Quote:
|
|||
Thread Tools | |
Display Modes | |
|