Need a Pallet / Half Pallet in Sydney asap

[gcg2503]

Hey Guys

I need a pallet / half pallet urgently in Sydney (West Ryde)

Does anyone how I could get one to West Ryde

I am in Melbourne so getting one from here to Sydney is difficult

Any assistance or guidance will be greatly appreciated

Also, how do we strap it down for transport securely?

I will be using TNT transport to transport it to Melbourne

Thanks

George

[Jim Goose]

A lot of businesses throw their pallets out (unless its a CHEP or similiar)... just do the rounds of any industrial area and see if there any thrown in bins or sitting around the place and ask to grab one.

[Landau Stable]

George forgot to mention, that the reason we need a pallet is because we will be using it to ship his engine. So just after any suggestions on the best way to secure it etc, as well as finding a suitable pallet in the first place.

[Jim Goose]

Make up some long brackets so you can attach the engine mounts to them. Bolt the brackets to the pallet (use large feet to spread load). Make two more brackets for the front and rear and bolt it to crank and water pump if fitted. Stick a tyre under sump!

Make sure any bolts you use go in "upsidedown". i.e: bolt heads underneath so that forklift tynes dont catch on them

Wrap in shrink wrap... and make sure oil is drained.

[mash again]

bandit strap

[nb_351]

mate if i wasnt so far away from ryde id do it, working for a transport company we have oodles of them lying around, but i work in bankstown which is a bit far to go without a reason as a truck mechanic haha

[XR037]

If you have a mate that works in the market or supermarket, should be easy to take a pallet. Woolworths have so much, dont keep a clear record of them anyway

[GreenR]

Originally Posted by XR037

If you have a mate that works in the market or supermarket, should be easy to take a pallet. Woolworths have so much, dont keep a clear record of them anyway

Ah not that easy. But if you have the manager not caring then your all good

[XR037]

Originally Posted by plarazza

Ah not that easy. But if you have the manager not caring then your all good

LOL, yeh i was a duty manager...should of said that friend had to be a manager, lol

[kyro_02]

a lot of company's won't care if you take a chep pallet, just ask them... most of the stuff at my work never gets looked over :P

[sneaky]

any luck getting the pallet to ryde?

[Mechan1k]

Should be able to get one or 2 ... in laws have a few laying around.
As I courier I come across a few when I have to hand unload a job and get left a pallet.

my other job is in Macquarie Park as well.
If you need I'll see if i can grab one and drop it off.
Where in Ryde do you need it?

[gcg2503]

Hey Guys

Should have updated the thread!

Michael found one right outside his place a few days back. A perfectly good half pallet - perfect for the Clevo

Thanks for everyones input and offers of assistance

Much appreciated

George

[Mechan1k]

That's a win ... some days when you need one .... you can't get one ... ansd when you never need one ... I end up with a few and have to try and offload them.

Typical.