|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
26-10-2005, 11:07 AM
|
#1 | ||
|
Starter Motor
Join Date: Aug 2005
Posts: 9
|
Hi Guys, have a very annoying problem appeared recently which has a few mechanics scratching their heads -(
Pads and Rotors changed, all checked by same outfit and mechanic that has serviced the car for the last 4 years no problems... now we have a type of squeak that can realy only be heard if running at 100km's along the motorway against a barrier to get the sound to bounce back at you. It would sound like it's coming from the R/F wheel or brake assembly, the noise stops when applying the brakes... (have checked handbrake - no difference) we have since gone through 2 more sets of rotors and pads, new calipers etc, coils and shocks checked... driving us NUTS !! please help.. |
||
|
|
|
26-10-2005, 12:47 PM
|
#2 | ||
|
Miami Pilot
 
Join Date: Jan 2005
Location: ACT
Posts: 21,703
|
Wheel bearings?
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
||
|
|
|
|
26-10-2005, 12:52 PM
|
#3 | ||
|
Tribal Elder
Join Date: Jul 2005
Location: Yarrambat
Posts: 2,278
|
Split pin retaining the w/bearing rubbing on the dust cap?
|
||
|
|
|
|
26-10-2005, 12:56 PM
|
#4 | |||
|
Starter Motor
Join Date: Aug 2005
Posts: 9
|
Quote:
|
|||
|
|
|
|
26-10-2005, 12:56 PM
|
#5 | |||
|
Starter Motor
Join Date: Aug 2005
Posts: 9
|
Quote:
Cheers |
|||
|
|
|
|
27-10-2005, 10:36 AM
|
#6 | ||
|
Cookie Monster
Join Date: Sep 2005
Location: Sydney
Posts: 371
|
Hi guys,
This squeak can sometimes come from the contact between the pad and the caliper. There sometimes is a bit of movemnet which makes it squeak. When you apply the brakes the movement is stopped by the pressure of the piston. There is a CRC product called "Disc Brake Quiet" which you apply to the back of the pads to eliminate this. Check out the link below for details.. http://www.mz3.net/articles/241.html Cheers Engineer |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
AU XR6 - rotational noise or squeak after new brakes
Linear Mode
