|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
22-07-2011, 11:27 PM
|
#1 | ||
|
Q - CAR
Join Date: May 2011
Location: Central Coast ..
Posts: 746
|
hi guys - need a bit of help.
I ve installed a trickflow cam with the following firing order 1-3-7-2-6-5-4-8 Its seems like a really silly question - but how do i get the to work with my twin coil pac? Currently i have my leads connected to like diagram below, example position number 1 on the coil pac is connected to cylinder 1. 6 on coil pac is connected to #6 cylinder. Basic problem with my engine is low vacuum. Mechanic suggest i try the 'other' firing order. Basically i have 2 firing orders. 5.0 1-5-4-2-6-3-7-8 5.0 HO 1-3-7-2-6-5-4-8 Last edited by bluestripes; 19-10-2012 at 10:28 PM. |
||
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
AU Firing order... trickflow cam
Linear Mode
