|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
16-08-2011, 09:44 PM | #1 | ||
Regular Member
Join Date: Jun 2009
Posts: 245
|
I would like to add the consol light feature to my AU 1 Forte, i picked one up from a wrecker it has the two wire loom attached green/yellow and black/dark blue. Where would the best place to tap into the loom? i remember reading this in someones build thread a while ago.
thanks |
||
16-08-2011, 11:23 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: Nov 2008
Location: Melbourne, Vic
Posts: 1,121
|
There is a couple of threads worth looking at.
http://www.fordforums.com.au/showthr...+console+light http://www.fordforums.com.au/showpos...7&postcount=72
__________________
AU III Forte wagon - V8, 5spd man, lowered, 18" Honeycombs, Stock diff rebuilt with TruTrac LSD, Leather Ghia interior/dash, custom twin 2.5" into single 3" exhaust. Wagon Build AU I Forte Sedan - No longer
Toy Car Build |
||
16-08-2011, 11:31 PM | #3 | ||
Starter Motor
Join Date: Aug 2009
Posts: 16
|
I installed mine, along with the two front foot well lights just the same as the links above describe.
they work well. by the way, I used leds in all the lights. regards, Laurie. |
||
Thread Tools | |
Display Modes | |
|