|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
31-07-2011, 08:43 AM
|
#1 | ||
|
Starter Motor
Join Date: Feb 2010
Posts: 7
|
HI guys I am putting a 4 speed escort box into the auto Mk2 escort I bought. has any one done this before, the auto crossmember does not quite line up
 , any ideas on bracket etc to line up the mount/crossmember/gearbox, photos, descriptions or measurements would be greatly appreciated |
||
|
|
|
10-08-2011, 09:41 PM
|
#2 | ||
|
Starter Motor
Join Date: Aug 2011
Location: Melbourne
Posts: 2
|
Possibly a manual crossmember would do it. . . . But I remember fitting a late model box to a mk1 years ago, and welding steel straps to the crossmember and drilling new holes in the straps to line up with the mount holes.
|
||
|
|
|
|
11-08-2011, 11:56 AM
|
#3 | ||
|
Regular Member
Join Date: Jan 2006
Posts: 283
|
Ask over here and you'll get a few pointers
http://www.classic-ford.org/forum/ http://www.rsmotorsport.com.au/
__________________
ZJ Fairlane 351C SY Territory Skicraft Excel 350 Mercruiser |
||
|
|
|
|
27-08-2011, 01:08 PM
|
#4 | ||
|
Starter Motor
Join Date: Feb 2010
Posts: 7
|
Thanks guys, I got it sorted by using a modified mk2 escort auto gearbox mount
|
||
|
|
|
|
01-09-2011, 02:30 AM
|
#5 | ||
|
Old Mate
Join Date: May 2010
Location: Perth, W.A.
Posts: 20
|
where'd you end up getting the template from?
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Gearbox conversion
Linear Mode
