Brake booster

[662DXP]

Hi There everyone,

I am build a 302 Windsor Xp 2 door coupe. And I'm looking to fit a brake booster to the firewall along with a double master cylinder. Has anyone done this and what set up did you use??? I have heard a few people talk about a Gemini booster as they are only about 5 inches in diameter with a xb master cylinder??? Any info or pics would be help full.
Cheers Darryl.

[gregaust]

Have a look at hoppers stoppers do a kit specific for XP, fits up nice too

[662DXP]

Thanks Mate,

I have a tread in classics of my project. And have just replied to noflac52 who has also mentioned hopper stoppers, He has also told me to move my thread to the projects which I have now done and updates will happen there as I do them. Have you purchased a kit and in place how much roughly???? Disc up front drum back set up????
Cheers Darryl

[graham7773]

Just a thought, why don't you go to 4 wheel discs? It is not all that hard to do. I believe that some of the later Falcon diffs almost bolt straight in. By later, I mean XW, XY, XA,B,C. and maybe even the D,E,F diffs.

[gregaust]

The kit was about $550 which is pretty fair considering you'd hardly buy a new booster and master at that price .
It fits up pretty nicely and has all you need , minor mods to the pedal box and open up the hole in the firewall a touch..

If you like i have a copy of the instructions i can send you , PM me an email address if you'd like to see .

[The Yeti]

mate shoot down to the classic falcons thread and in the modifications bible you'll find a few options

theres a number of ways of doing it and a lot less expensive ways of doing it that using hoppers over priced eBay quality compnents

[662DXP]

Originally Posted by graham7773

Just a thought, why don't you go to 4 wheel discs? It is not all that hard to do. I believe that some of the later Falcon diffs almost bolt straight in. By later, I mean XW, XY, XA,B,C. and maybe even the D,E,F diffs.

Hi Mate,
I think the later models from xr on are wider. I have a Centura diff to go into the project and the give me the five stud pattern and for memory they were about an 8 and 3/4 inch diff???

Cheers

[662DXP]

Originally Posted by gregaust

The kit was about $550 which is pretty fair considering you'd hardly buy a new booster and master at that price .
It fits up pretty nicely and has all you need , minor mods to the pedal box and open up the hole in the firewall a touch..

If you like i have a copy of the instructions i can send you , PM me an email address if you'd like to see .

Hi Mate have sent you a PM

[662DXP]

Originally Posted by The Yeti

mate shoot down to the classic falcons thread and in the modifications bible you'll find a few options

theres a number of ways of doing it and a lot less expensive ways of doing it that using hoppers over priced eBay quality compnents

Hi Mate,

Thanks for that will go and have a look at the bible.

Cheers