|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
21-03-2012, 01:13 PM | #1 | ||
Regular Member
Join Date: Feb 2012
Posts: 41
|
Hey all
my 2004 Fiesta WP Lx blew two radiator hoses and now needs new hoses and a radiator flush after taking it to my mechanic to see what was the damage after it over heated on sunday. Parts ex Melbourne + Radiator Flush + Labour = $460.00!!!! Cant belive how expensive parts are for a fiesta compared to my Magna! and this is all after calling aftermarket parts and Genuine all roughly the same price. whats your thoughts on this?? thanks Jimmy |
||
21-03-2012, 02:42 PM | #2 | ||
Regular Member
Join Date: Mar 2011
Posts: 204
|
how much for the 2 hoses (parts only)?
|
||
06-04-2012, 09:55 PM | #3 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
just my 2c, i think there`s a bit of time component also involved there, you said needs new hoses, if i was a mechanic knowing what you just typed on the page, i would be checking/replacing all hoses in the engine bay , the rubber is the same age ,heater hoses and bypass hose to if it has one as well as the radiator hoses already mentioned, the time to flush it out (with or without chemicals?$$$), rinse it out, drain it, put fresh coolant in it$$$$, check it for leaks and air pockets and over heating from possible head damage, a ten minute job it is not.
|
||
Thread Tools | |
Display Modes | |
|