AU 330mm Rotors.

[dc_todd]

Hi Matt,

I am looking for options for brakes for my T1 TE50, I have previously purchased the elliptical Slotted Rotors from you with QFM pads.

My rotors are already showing the early signs of warping. Some spirited driving to Jenolan Caves and back did that. I am now running Bendix SRT pads and would be lucky to have 5000km on the actual disks.

I am aware the stock rotors were somewhat prone to warping, out of interest, what are the DBA 5000 series worth with hats?

If you could run through a few prices for the 4000 series XS, the 5000 slotted and 5000 XS. Supply only.

Much appreciated.

Dave

[FLOORED]

Originally Posted by dc_todd

Hi Matt,

I am looking for options for brakes for my T1 TE50, I have previously purchased the elliptical Slotted Rotors from you with QFM pads.

My rotors are already showing the early signs of warping. Some spirited driving to Jenolan Caves and back did that. I am now running Bendix SRT pads and would be lucky to have 5000km on the actual disks.

I am aware the stock rotors were somewhat prone to warping, out of interest, what are the DBA 5000 series worth with hats?

If you could run through a few prices for the 4000 series XS, the 5000 slotted and 5000 XS. Supply only.

Much appreciated.

Dave

Dave in some instances we have found that some Bendix pads actually leave deposits on the rotor surface and around the slots which can cause a shudder and it is common on the Bendix CT pads which is why we don't recommend them so it may be possible it is happening with the SRT pads so check the rotor surfaces for any resin/pad deposits first.
$250 each T3
$264 each XS
$535 each DBA 2 piece slotted
$575 each DBA 2 piece XS

[dc_todd]

Originally Posted by FLOORED

Dave in some instances we have found that some Bendix pads actually leave deposits on the rotor surface and around the slots which can cause a shudder and it is common on the Bendix CT pads which is why we don't recommend them so it may be possible it is happening with the SRT pads so check the rotor surfaces for any resin/pad deposits first.
$250 each T3
$264 each XS
$535 each DBA 2 piece slotted
$575 each DBA 2 piece XS

Thanks Matt,

The warping was starting with the QFM pads, its not gotten anyworse with the SRT's I was thinking that a better quality rotor would resolve my issue.