Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 29-05-2012, 10:04 AM   #1
shayne93
66 Mustang
 
shayne93's Avatar
 
Join Date: Jan 2009
Location: Townsville, QLD
Posts: 206
Default Quality of fibreglass AU XR Bumper

Has anybody got any comments on the quality of the fibreglass (Fibresports/AWC) AU XR front bumpers.

I am thinking of getting one but I don't want to buy something people regard as rubbish.

shayne93 is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2012, 05:56 PM   #2
MNM96
LIFELONG DJR SUPPORTER
 
MNM96's Avatar
 
Join Date: Apr 2005
Location: CENTRAL QUEENSLAND
Posts: 5,324
Default Re: Quality of fibreglass AU XR Bumper

Fibreglass is fine, if done right. My understanding is Fibresports are at the better end.

Word for the wise, Fibreglass is not at all forgiving. Slight bumps which would not show on a factory bar will show on a glass bar. I repaint my front bar about every 1.5 years, while the rear gets a do over about every 3. It is probably impacted because of the height somewhat.

I am not concerned though. When it is right, it looks ""Manifik!""

MNM96 is offline   Reply With Quote Multi-Quote with this Post
Old 29-05-2012, 06:01 PM   #3
FGII-XR6
FF.Com.Au Hardcore
 
FGII-XR6's Avatar
 
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
Default Re: Quality of fibreglass AU XR Bumper

as above, I have a fibersports bar it was a good fit and well made but I doubt I would go glass again it is too unforgiving for me
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty.

"It is better to remain silent and be thought a fool than to speak out and remove all doubt."

Start a new career as a bus driver

Rides:
FG2 XR6 stock at this stage but a very nice ride

xc 4 DOOR X CHASER 5.8 UNDER RESTO
FGII-XR6 is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 09:22 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL