|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-12-2005, 03:08 AM
|
#1 | ||
|
Starter Motor
Join Date: Oct 2005
Posts: 23
|
The rear view mirror on my Au 2 makes an annoying buzz when the car is in motion. I can stop it by putting my finger on it but that is not a long term solution.
It appears that the wedge connection between the mirror assembly and the adhesive part on the screen needs a little help but How tell me how does the mirror disconnect from the screen mounting? |
||
|
|
|
05-12-2005, 03:22 AM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Narangba QLD
Posts: 4,338
|
have you tried tightening the allen key?
goto supercheap and get some BEST BUY allen keys for $3 and us the 2nd smallest one i think it was.. and nip it up nice and tight.. mine has only come loose twice now.. and i have 2x 15s kickin away in the boot 
|
||
|
|
|
|
05-12-2005, 08:50 PM
|
#3 | ||
|
Starter Motor
Join Date: Oct 2005
Posts: 23
|
Thank you for your kind thought, Blackers 10. My XD, XE, EA and EB 2 all had Allen key retention but this one on the AU is different. It has two, about 3mm square, holes on the top of the mirror retention assembly about 8mm apart with what looks like a spring clip inside but my nose gets in the way when I get up close to seek more details!
No amount of prodding, both jointly and singly, seems to release any hidden catch. Buzz buzz! |
||
|
|
|
|
06-12-2005, 02:46 AM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Narangba QLD
Posts: 4,338
|
mine has been the allen key that u can see when looking BELOW the mirror.. that sorta attached the mirror ELBOW to the windscreen it self..
u could jiggle the whole thing up and down a fair way... im guessing thats how you remove the mirror from the windscreen |
||
|
|
|
|
06-12-2005, 03:13 AM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2005
Posts: 4,409
|
From memory and may be wrong the AU rear V mirror just snaps back on ? have you given it a gentle nudge back ?
Does it look like it should just snap back with the spring clip you mention? Pete |
||
|
|
|
|
06-12-2005, 05:56 AM
|
#6 | ||
|
Big Block
Join Date: Oct 2005
Location: NewZealand
Posts: 16
|
 : Hi 91a,Windscreen guy here.. The mirror does just slide onto the wedge mirror boss.When it slides down it has 2 prongs that clip over the edge of the boss. 2 ways ro get it off.. 1- insert long skinny prod up the square hole on the bottom to release the prongs and push upwards on the mirror. 2- grab mirror with both hands while lifting up, twist anti-clockwise.The boss is strongly mounted to the glass so mirror should come away with a little force. Obviously the 1st method is preferred if 2nd is nerve racking,but 2nd is quicker. Good luck!! PS. I presume Aussie has the same mirror boss bonding methods as NZ.. : PSS. Once off,refit with sika urethane in the connection part.Only be a for the next screen fitter..  :
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Rear View Mirror
Linear Mode
