|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
03-09-2012, 09:40 AM
|
#1 | ||
|
Regular Member
Join Date: Apr 2010
Posts: 489
|
Hi Guys,
Has anyone changed the instrument clusterover on a ZC Fairlane. The young bloke an I have a project ZC Fairlane and the young bloke wants the GT/GS Dash in place of the non working Fairlane instrument panel. Any info would be appreciated. |
||
|
|
|
03-09-2012, 10:00 AM
|
#2 | ||
|
Banned
Join Date: Jun 2010
Posts: 2,811
|
I have no doubt that the GT dash can be installed in a ZC but I don't think it looks right as I did see a picture recently on either this site or on Ford Muscle Cars web site. The dash fascia dimensions should be exactly the same but you will need to fit an oil pressure switch for an oil gauge. Not sure if the plug at the rear needs extra wiring for the tachometer.
|
||
|
|
|
|
03-09-2012, 12:19 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2010
Location: Adelaide
Posts: 1,905
|
Did it 25 years ago and then again about 17 years ago. From memory there was some steel to cut around the 3 x gauge pod area, spacers or not (?) for the clock and thats about it. Plug needs to be cut off and wired individually. All pretty straight forward. But anything to do with working on dash's is a PIA!
|
||
|
|
|
|
03-09-2012, 03:02 PM
|
#4 | ||
|
Regular Member
Join Date: Apr 2010
Posts: 489
|
Thanks for the info guys.
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
GT instruments in ZC Fairlane
Linear Mode
