|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
16-10-2012, 10:36 PM
|
#1 | ||
|
Starter Motor
Join Date: Jan 2010
Posts: 11
|
I Have A Vibration In The Front End At Around 100k's, I've Had New Tyre's And Balance Done And Is Still There. Feels Like An Oval Tyre But All Good There. Any Thoughts Anybody
|
||
|
|
|
17-10-2012, 09:49 AM
|
#2 | ||
|
5.6L x 2 pilot
  
Join Date: Dec 2009
Location: Canbra
Posts: 15,073
 
|
In the past, I have had a similar problem at 60kph. Turned out to be the harmonic balancer.
__________________
2002 AU II LTD 5.6L 342ci T3 Short, AFR165 heads, Comp XE270HR-12 Cam, Brembo 4/4s(355/330), T3 5 spokes, LC-1 wideband, Whiteline HD swaybars, TCE 3K Hi Stall, PWR Auto Trans Cooler, Koni shocks, King Low Springs, Hurricane headers, 100 cpsi cats, Twin 2.5" exhaust. Quarter Mile: 13.73 @ 105.86mph Runner Up NA/DA to BF Fairlane/LTD Geelong AFD 2024  2002 XR8 pursuit 250 Custom twin 2.5" exhaust w Herrod modifed extractors, Tuned with Moates QH
|
||
|
|
|
|
17-10-2012, 10:05 AM
|
#3 | ||
|
Auto Nerd
Join Date: Feb 2012
Location: Sydney
Posts: 808
|
Mine is a 6, but I had the same issue about a year ago. Mine turned out to be the sway bar link pins and the lower control arm bushes which was causing the main vibration.
I ended up doing all ball joints and upper arm bushes as well. Drives like a new car now. |
||
|
|
|
|
17-10-2012, 11:28 AM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
delete
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Front End Problem Au1 Xr8 Ute
Linear Mode
