|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
22-03-2013, 08:44 PM
|
#1 | ||
|
Regular Member
Join Date: Jul 2011
Location: Bassendean WA
Posts: 181
|
just wondering what gauge steel is best to use for welding sill and subframe repairs?
and what about panels such as doors etc? TB |
||
|
|
|
22-03-2013, 09:19 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
i believe the ideal gauge is the same as what you are repairing.
|
||
|
|
|
|
22-03-2013, 09:49 PM
|
#3 | ||
|
Banned
Join Date: Mar 2010
Location: PERTH. WA
Posts: 4,697
|
I got my zinc plated sheet steel from midalia steel in welshpool,give them a buzz and see what sizes they have,i cant remember what size i got.
I just used a piece to patch my inner sill and it worked pretty good. Just went out to the shed and measured my steel and its between .9 and 1mm(my eyes struggling to read the verniers) I agree with what was said about using as close a guage to what you are welding,i think factory sheetmetal is between .6 and 1mm. Last edited by STINKY NINJA; 22-03-2013 at 09:54 PM. |
||
|
|
|
|
22-03-2013, 10:36 PM
|
#4 | ||
|
Regular Member
Join Date: Jul 2011
Location: Bassendean WA
Posts: 181
|
thanks guys.
it obviously makes sense to replace like for like, but i dont have a set of callipers. or a knowledge of whats standard. |
||
|
|
|
|
22-03-2013, 11:11 PM
|
#5 | ||
|
Donating Member
 Join Date: Dec 2004
Location: QLD
Posts: 11,836
 
|
Outer panels 1mm. Some inner sills etc are thicker like 1.2mm, some are 1.6mm
|
||
|
|
|
|
24-03-2013, 08:41 PM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
in an aid to measuring your sheet metal or stuff in general , you can get very cheap electronic calipers these days, very handy from most tool places for about 20 odd buks.
http://www.custompartnet.com/sheet-metal-gauge |
||
|
|
|
|
25-03-2013, 08:31 PM
|
#7 | ||
|
Shaine
Join Date: Aug 2012
Posts: 533
|
16 gauge=1.6mm,18 gauge=1.2mm,20 gauge=1.0mm
All are ok, depends on application,eg. Thinner the metal easier to work.
__________________
2010 GS 315,S/S 3INCH X-Force,,6/4brembos,Shockworks Coilovers FOR SALE... 
|
||
|
|
|
| This user likes this post: |
|
| Thread Tools | |
| Display Modes | |
|
|
different sheet steel gauges
Linear Mode
