|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
25-03-2013, 07:37 AM
|
#1 | ||
|
Starter Motor
Join Date: Feb 2012
Posts: 6
|
Hi, does anyone out there have any idea how to fit an aftermarket gear knob on a Fiesta WS/WT? I've tried, but the knob doesn't seem to come off on its own like in other vehicles. Instead, it's attached to the gaiter by a plastic ring that has me flummoxed.
I don't want to damage the ring as getting hold of a new one would be impossible me thinks. Many thanks Sam  |
||
|
|
|
25-03-2013, 08:05 PM
|
#2 | ||
|
having Fiesta withdrawals
Join Date: May 2011
Location: God's Country (The Shire)
Posts: 595
|
You have to look up the inside of the gaiter and turn it inside out and you will find a clip that goes around. flat blade screwdriver and some picking will get it off. Then do the reverse to put on a new one. What knob have you got? I only changed my gaiter...
__________________
New: Ford Focus RS in Ultimate Green number 82/315 Past: 2009 Ford Fiesta LX in Vision Blue - Sold |
||
|
|
|
|
25-03-2013, 08:50 PM
|
#3 | ||
|
Starter Motor
Join Date: Feb 2012
Posts: 6
|
http://sickspeed.com/pages/5s10X1p25nOC.html
It's the last one at the bottom of the page. Unfortunately, after looking at it, there seems to be no way to clip the gaiter back to the new knob as there is no locking tab. |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Removing gearknob from gaiter
Linear Mode
