Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 04-01-2006, 04:02 PM   #1
Lindsay
Starter Motor
 
Join Date: Jan 2006
Posts: 2
Angry Headlight globe clip

I am attempting to change a low beam globe (AU2) - I managed to release the wire spring clip but cannot do it up to secure the globe - can anyone assist with the 'how' please?

Lindsay is offline   Reply With Quote Multi-Quote with this Post
Old 04-01-2006, 04:57 PM   #2
Bucknaked
FF.Com.Au Hardcore
 
Bucknaked's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 11,647
Default

XR or non XR?

I have to change the drivers side myself. Mines an XR
Bucknaked is offline   Reply With Quote Multi-Quote with this Post
Old 04-01-2006, 06:10 PM   #3
Hoops
I'm Back
 
Hoops's Avatar
 
Join Date: Dec 2004
Location: Wagga Wagga
Posts: 3,229
Default

No idea mate but i moved the thread to an area where you will get more responses.

Cheers

Hoops
Hoops is offline   Reply With Quote Multi-Quote with this Post
Old 04-01-2006, 06:40 PM   #4
jimt3te50
My kids think I'm cool
 
jimt3te50's Avatar
 
Join Date: Jan 2005
Location: Perth, WA
Posts: 7,880
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Jim has consistently for some time now shared his life, and his passions in his XY GT and more so his FG GT in a way so everyone here feels part of the journey, which helps make AFF such a worthwhile place to be.  An outstanding contributor in my book. 
Default

pull up on the clip and move it to your left and then back towards you then release to the right- I always drive with my headlights on and change headlight globes every 6-8 weeks- that's all they last at 800km a week.

best way I can describe it- be careful not to lose the little locating pivot on the bottom of the clip- I did and have to put the clip on manually now and it takes about 45 minutes!!
__________________
2011 FPV GT 335 >My Build Thread<
(Posts 3511-3515 has a compilation of most of the pics, page 118 @ 30 posts per page)
BLUESTREAK built 5.2L flat-plane-crank VOODOO with 3.2L Intercooled Kenne Bell blower, 1000rwhp/746rwkw @ 8000rpm @ 20psi on E85. Built ZF with BLUESTREAK 2C Circle D converter. Unbloodybelievable...
2018 Ford Ranger RAPTOR
2013 Audi SQ5
jimt3te50 is offline   Reply With Quote Multi-Quote with this Post
Old 04-01-2006, 10:37 PM   #5
The Dok
FF.Com.Au Hardcore
 
The Dok's Avatar
 
Join Date: Feb 2005
Posts: 805
Default

Quote:
Originally Posted by Lindsay
I am attempting to change a low beam globe (AU2) - I managed to release the wire spring clip but cannot do it up to secure the globe - can anyone assist with the 'how' please?
I'll take a punt..... Make sure the bulb (H4) is located correctly as they only fit "1" way (wide prong to top). Also be sure the spring clip is firmly seated in the "groove" at the pivot end (held in place by a press-fit clip) otherwise the retainer will not fit properly. Sometimes it is actually easier to remove the headlight ***'y to perform this task because if you lose the retainer (within the headlight) you will have to remove it anyway. :
__________________
Removed by laminge
The Dok is offline   Reply With Quote Multi-Quote with this Post
Old 04-01-2006, 11:27 PM   #6
couz^man
Regular Member
 
couz^man's Avatar
 
Join Date: Dec 2005
Posts: 36
Default

Quote:
Originally Posted by jimt3te50
pull up on the clip and move it to your left and then back towards you then release to the right- I always drive with my headlights on and change headlight globes every 6-8 weeks- that's all they last at 800km a week.

best way I can describe it- be careful not to lose the little locating pivot on the bottom of the clip- I did and have to put the clip on manually now and it takes about 45 minutes!!
i hear ya i lost the little locating thing
took me an hour lol
couz^man is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2006, 02:59 AM   #7
jimt3te50
My kids think I'm cool
 
jimt3te50's Avatar
 
Join Date: Jan 2005
Location: Perth, WA
Posts: 7,880
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Jim has consistently for some time now shared his life, and his passions in his XY GT and more so his FG GT in a way so everyone here feels part of the journey, which helps make AFF such a worthwhile place to be.  An outstanding contributor in my book. 
Default

Quote:
Originally Posted by couz^man
i hear ya i lost the little locating thing
took me an hour lol
no lol about it couz^man- it gives you the bloody ИИИИИs!!
__________________
2011 FPV GT 335 >My Build Thread<
(Posts 3511-3515 has a compilation of most of the pics, page 118 @ 30 posts per page)
BLUESTREAK built 5.2L flat-plane-crank VOODOO with 3.2L Intercooled Kenne Bell blower, 1000rwhp/746rwkw @ 8000rpm @ 20psi on E85. Built ZF with BLUESTREAK 2C Circle D converter. Unbloodybelievable...
2018 Ford Ranger RAPTOR
2013 Audi SQ5
jimt3te50 is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2006, 08:56 AM   #8
Whoosha
AU DIE HARD
Donating Member1
 
Whoosha's Avatar
 
Join Date: Nov 2005
Location: Between 2nd and 5th gear
Posts: 5,073
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For all the things you do behind the scenes. Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by jimt3te50
pull up on the clip and move it to your left and then back towards you then release to the right- I always drive with my headlights on and change headlight globes every 6-8 weeks- that's all they last at 800km a week.

best way I can describe it- be careful not to lose the little locating pivot on the bottom of the clip- I did and have to put the clip on manually now and it takes about 45 minutes!!
Number two son has same isues with his always rh side , easy fixed bring it to dad to fix,,,,,,,,,, : now clip +retainer have vanished .........
R+R head light now in under 5 min.
Fathers day pressy better be a good ome this year ........ lol whoosha :
__________________

........Age and treachery will ALWAYS overcome youth and skill.......


CORTINA 250 2V POWER soon to be AUXR8 Windsor pwrd


.............WINDSOR WARLORD WHO CARRIES THE CLEVO MAFIA AND BROKEN BOSSES...
..................................................

Quote:
Originally Posted by Riksta
Quote of the weekend: "The quarter mile wasn't as long as I expected it to be".
Whoosha is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2006, 01:14 PM   #9
Lindsay
Starter Motor
 
Join Date: Jan 2006
Posts: 2
Red face

Quote:
Originally Posted by jimt3te50
pull up on the clip and move it to your left and then back towards you then release to the right- I always drive with my headlights on and change headlight globes every 6-8 weeks- that's all they last at 800km a week.

best way I can describe it- be careful not to lose the little locating pivot on the bottom of the clip- I did and have to put the clip on manually now and it takes about 45 minutes!!
Jim - that was the answer - fanx mate - all globes H4 and H1 changed and looking blue...cheers, Linds
Lindsay is offline   Reply With Quote Multi-Quote with this Post
Old 05-01-2006, 03:10 PM   #10
clontarf_x
FF.Com.Au Hardcore
 
Join Date: Feb 2005
Posts: 1,042
Default

Quote:
Originally Posted by Lindsay
Jim - that was the answer - fanx mate - all globes H4 and H1 changed and looking blue...cheers, Linds
you forgot "lol"
clontarf_x is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 11:10 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL