Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 14-01-2013, 06:08 PM   #1
ZXTC
Starter Motor
 
Join Date: Mar 2005
Posts: 26
Default rough idle on startup --

Hi all

I have a series one au wagon on gas.
When I have a cold start the car idles rough and the
Whole car shakes for around 10 seconds then idles fine.
Any ideas ?

Cheers Mick

ZXTC is offline   Reply With Quote Multi-Quote with this Post
Old 07-07-2013, 01:32 PM   #2
NCII40
XR6T BA 2002
 
NCII40's Avatar
 
Join Date: Apr 2011
Posts: 682
Default Re: rough idle on startup --

having same problem on a eb 4 litre on gas

anyone keen to help us outtttttttt ?????????????????????????????????????????????????
NCII40 is offline   Reply With Quote Multi-Quote with this Post
Old 12-07-2013, 05:17 PM   #3
zorba289
Regular Member
 
zorba289's Avatar
 
Join Date: Nov 2007
Location: Sydney
Posts: 49
Default Re: rough idle on startup --

hi,

Me three, I had exactly the same issues as mentioned above, idled rough for the first 10 seconds or so ,then ran fine, even if I started it up straight away the issue would not be there
So I decided to pull the fist solenoid off (the one right near the stepper motor) and unscrewed the brass fitting (don't know what its called) and all the parts , then notice the solenoid appeared to have corrosion through the centre of it , so I changed it with a spare one
Everything works fine know ,so not sure if it was the solenoid or the cleaning of the brass parts or a combination of both

cheers
john
zorba289 is offline   Reply With Quote Multi-Quote with this Post
Old 16-07-2013, 12:34 PM   #4
NCII40
XR6T BA 2002
 
NCII40's Avatar
 
Join Date: Apr 2011
Posts: 682
Default Re: rough idle on startup --

Quote:
Originally Posted by zorba289 View Post
hi,

Me three, I had exactly the same issues as mentioned above, idled rough for the first 10 seconds or so ,then ran fine, even if I started it up straight away the issue would not be there
So I decided to pull the fist solenoid off (the one right near the stepper motor) and unscrewed the brass fitting (don't know what its called) and all the parts , then notice the solenoid appeared to have corrosion through the centre of it , so I changed it with a spare one
Everything works fine know ,so not sure if it was the solenoid or the cleaning of the brass parts or a combination of both

cheers
john

thanks john for the reply
but um what solenoid am i looking for
cheers
NCII40 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 10:24 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL