|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
25-05-2011, 10:32 PM
|
#31 | |||
|
You can't stop the signal
Join Date: Nov 2005
Location: Behind a computer at work
Posts: 1,624
|
I'm thinking that the key reader is different.
Series 1 has four wire key reader and series 1.5 has a 5 wire key reader. Between the car and the dash, I pretty sure they are the same Cheers
__________________
Quote:
|
|||
|
|
|
25-05-2011, 10:38 PM
|
#32 | ||
|
Just another mock-up..
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
|
where is the key reader..?
Will that be something that I am changing... I'm basically putting in the whole TS50 dash and associated looms.. Including the Complete TS50 Steering coloumn and loom..
__________________
Desire isn't driven by the heart, the mind or the wallet. Desire comes from another place. It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night... see my car here: Built my own TL50!!! [SIGPIC][/SIGPIC]
|
||
|
|
|
|
25-05-2011, 11:22 PM
|
#33 | |||
|
You can't stop the signal
Join Date: Nov 2005
Location: Behind a computer at work
Posts: 1,624
|
If your changing the column, your changing they key reader.
Cheers PS. For those of you playing at home, it is the plastic device that is around the ignition barrel (separate to the barrel)
__________________
Quote:
|
|||
|
|
|
|
25-05-2011, 11:39 PM
|
#34 | ||
|
Just another mock-up..
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
|
That's great..
Thanks again mate.....!
__________________
Desire isn't driven by the heart, the mind or the wallet. Desire comes from another place. It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night... see my car here: Built my own TL50!!! [SIGPIC][/SIGPIC]
|
||
|
|
|
|
26-05-2011, 12:25 AM
|
#35 | ||
|
Lacking Imagination
Join Date: Jul 2006
Location: In The Global Collective
Posts: 3,909
|
Done yet?
__________________
My 11 Second AU Fairlane 364w | 225cc CNC | ---/---@0.050 | Morrison Motorsport ITB Manifold | MoTeC M150 (Engine Control) | PCS TCM-2800 (Trans Control) | 6800rpm Stall | 4R75W |
||
|
|
|
|
26-05-2011, 01:49 PM
|
#36 | ||
|
Just another mock-up..
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
|
Yep...!!! hahah
Thanks to everyone for the info and tips.. It's greatly appreciated guys..!! Its all working, no probs with Smartshield at all... Everything plugged in and is operating perfectly..!! Here's how she's sitting at the moment.. still a bit to do but the main thing is.. Everything works..!!!!   Also, here's a vid of the ESS engaging..  Thanks again guys..!!
__________________
Desire isn't driven by the heart, the mind or the wallet. Desire comes from another place. It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night... see my car here: Built my own TL50!!! [SIGPIC][/SIGPIC]
|
||
|
|
|
|
26-05-2011, 04:28 PM
|
#37 | ||
|
Lost Boost Gained Class
Join Date: Jun 2008
Location: Werribee, Melbourne
Posts: 2,763
|
Fix Your Filler Cap
__________________
2006 BF Fairmont Ghia
2001 AU Falcon |
||
|
|
|
|
26-05-2011, 05:05 PM
|
#38 | ||
|
Just another mock-up..
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
|
hahaha.. It was open..!!!
Ok, one more question.. It seems now my indicators don't flash... they just stay on when turning...? It seems intermittant though.. sometimes they'll flash, sometimes they will just hold the light on until turned off..? Any ideas on what's going on there...?? Cheers Kris
__________________
Desire isn't driven by the heart, the mind or the wallet. Desire comes from another place. It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night... see my car here: Built my own TL50!!! [SIGPIC][/SIGPIC]
|
||
|
|
|
|
26-05-2011, 05:17 PM
|
#39 | ||
|
Lost Boost Gained Class
Join Date: Jun 2008
Location: Werribee, Melbourne
Posts: 2,763
|
check your relay in the fuse box as it might be getting stuck... i had this problem after i changed the relay it worked fine
__________________
2006 BF Fairmont Ghia
2001 AU Falcon |
||
|
|
|
|
26-05-2011, 05:19 PM
|
#40 | ||
|
Just another mock-up..
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
|
Yeah just did a bit of searching (should have done that first..lol) and I'll change the flasher relay with my original one.. should fix it...
Cheers mate..!
__________________
Desire isn't driven by the heart, the mind or the wallet. Desire comes from another place. It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night... see my car here: Built my own TL50!!! [SIGPIC][/SIGPIC]
|
||
|
|
|
|
22-09-2015, 09:06 PM
|
#41 | ||
|
Regular Member
Join Date: Dec 2013
Posts: 104
|
Hi mate I was just looking at your post I have a series 1.5 ute and I have just put in a series 2 ghia dash with the heater box and climate control basically the same as you did you change all the engine bay wiring as well and did it start and work for you I am getting a bir perplexed abour all of this another fellow was saying I had to change all the engine bay wiring as well I am spinning lol could you let me know how you went ... Thanks mate regards steve
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Re: Smartlock/ Smartshield (Series 1 to 1.5) HELP!!!
Linear Mode
