|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
14-01-2016, 06:21 PM
|
#1 | ||
|
Regular Member
Join Date: Apr 2015
Posts: 42
|
There's a spot somewhere between the A/C Button and the Demister Button on my Forte' Wagon. I here it at highway speed only . I can push my finger on it to shut-it-up' for a while ..till the next Bump, but then it's back again.
Any solutions to this problem would be much appreciated. |
||
|
|
|
15-01-2016, 02:03 PM
|
#2 | ||||
|
Regular Member
Join Date: Mar 2009
Location: Penrith, NSW
Posts: 38
|
Not sure if it's the same on the AU1 - but the temperature control panel is really sensitive to having the screws loosened.
Pull the front off, make sure everything is fastened and in place, and that all the tabs are there. If that doesn't solve it, use some blue tac to act as a buffer/deadener.
__________________
Quote:
Quote:
|
||||
|
|
|
|
15-01-2016, 11:11 PM
|
#3 | ||
|
Regular Member
Join Date: Apr 2015
Posts: 42
|
Thanks Ray,
The Blu tac might be the go . I know that the BCM unit is in behind there somewhere so I dont want to drill a hole or anything. I'll try this on the weekend ..and see how it goes. |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
AUII Dash Vibration
Linear Mode
