|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
04-02-2016, 02:15 AM | #1 | ||
Starter Motor
Join Date: Oct 2014
Location: NSW
Posts: 8
|
Hi all,
Just wondering why my AU wouldn't start over, until I moved it out of park (P) , down to Neutral (N) on the transmission, then it started, I turned the key over about 5 times, all lights on dash showed, with one warning light (l) and nothing happened until I changed out of park. After half an hour I parked in a side street, turned everything off, left it in P , and the car started normally, so it seems like a one off, or intermittent, what happened? does something need to be changed? Regards. Last edited by Night_EF; 04-02-2016 at 02:34 AM. Reason: additional information |
||
04-02-2016, 08:43 AM | #2 | ||
FF.Com.Au Hardcore
Join Date: Aug 2005
Location: Northern Tablelands
Posts: 940
|
sometimes the t bar doesn't go all the way up so it thinks it's in gear
__________________
2000 AU Wagon |
||
04-02-2016, 12:08 PM | #4 | ||
Starter Motor
Join Date: Oct 2014
Location: NSW
Posts: 8
|
thanks guys, I called my mechanic and he said the same thing about the inhibitor switch. Since it only happened once, I'll make sure the selector is actually where it needs to be, if it get's worse I'll find a switch somewhere or on ebay and get it changed.
Edit : Found some on ebay, used for $25, and a new one for $50, I just bought the new one, peace of mind. Last edited by Night_EF; 04-02-2016 at 12:29 PM. |
||
04-02-2016, 04:18 PM | #5 | ||
FF.Com.Au Hardcore
Join Date: Jun 2008
Location: Perth, Western Australia
Posts: 2,009
|
Yep, this.
__________________
Click here for my previous Photo Essays and Build Threads.
------------------------------- Good people. Bad people. Smart people. Dumb people. Car crashes. Vomit. Read about it all at Cabloid, the web site that has stories and photos about my life driving a taxi at night. www.cabloid.com.au |
||
04-02-2016, 06:28 PM | #6 | ||
Starter Motor
Join Date: Oct 2014
Location: NSW
Posts: 8
|
might be a silly question, does the colour matter? , I asked the seller if it's compatible with my AU series 1, and he said " yes, look at your sensor if its black " , any differences between the black and white one? shouldn't matter I assume
|
||
Thread Tools | |
Display Modes | |
|