|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
 |
|
|
Thread Tools | Display Modes |
01-07-2016, 09:51 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2010
Posts: 1,643
|
hi
with blocking off water pump heater pipe hole was wondering exactly do you use and how do you seal the welch plug and what exactly do you do what size welch plug do you need if you put a welch plug in that hole and you still want a working heater can you just put a t fitting in bottom header tank hose does that hose get hot as it is on the same tank as bottom hose can you tap the welch plug in pump heater hole while pumps still bolted on how do you seal the welch plug so it doesnt leak |
||
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
welch plug in ef/el/au water pump heater pipe hole
Linear Mode
