![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Cruisn
Join Date: Jun 2010
Location: Brisvegas
Posts: 178
|
Hey all
Where's the best place to source new springs, shock inserts and strut tops for a Mk1 Cortina? Also as an option, has anyone installed adjustable coilovers to the old struts? Has anyone been able to source new leaf springs also? Cheers
__________________
'77 F100 LWB 351 C4 Project Low '77 |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
RS The Faster Fords
![]() Join Date: Feb 2014
Location: Westralia
Posts: 1,691
|
Strut tops are getting harder to find, Mk1 Cortina club in the UK does them, double check though I think they might vary. You have to be a member to order, that'll cost $100 but they're parts are dirt cheap so it all evens out.
Have you thought about after market camber adjustable tops? Inserts and rear springs shouldn't be to hard, try Burtons UK and Gaz for coilover options. Retro Ford UK do Escort strut, hub, brake, rack and pinion conversion kits but they're not cheap
__________________
Escort RS2000 Restored factory a/c and alloys. TD Cortina Unrestored 35 000km 6cyl manual. Mk1 GT Cortina Project. FG XR50 Daily. |
||
![]() |
![]() ![]() |
![]() |
#3 | ||
Starter Motor
Join Date: Nov 2007
Posts: 16
|
I can help with original strut tops.
Munro for strut inserts. Any decent spring supplier for springs. You want a 52mm threaded sleeve if you convert to narrow spring platforms, but make sure your doing it for good reasons otherwise it's easy to run into problems pretty fast. Sniff around for truck spring businesses local to you that might make a set of leaf springs - pretty simple process. cortina-mk1.com Last edited by Dr Danger; 16-06-2017 at 04:49 PM. |
||
![]() |
![]() ![]() |
![]() |
#4 | ||
Cruisn
Join Date: Jun 2010
Location: Brisvegas
Posts: 178
|
Cheers for the replies
__________________
'77 F100 LWB 351 C4 Project Low '77 |
||
![]() |
![]() ![]() |
![]() |
Thread Tools | |
Display Modes | |
|