|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
27-10-2018, 02:35 PM
|
#1 | ||
|
Regular Member
Join Date: Dec 2017
Posts: 38
|
What is the tool I need to remove the retaining screws to take the airbag off the steering wheel?
Thanks, Wasim |
||
|
|
|
27-10-2018, 05:43 PM
|
#3 | ||
|
Regular Member
Join Date: Dec 2017
Posts: 38
|
Great - Thanks
|
||
|
|
|
|
27-10-2018, 11:54 PM
|
#4 | |||
|
You can't stop the signal
Join Date: Nov 2005
Location: Behind a computer at work
Posts: 1,624
|
It's a Torx Plus Security bolt (5 point, centre post). It is odd as torx is usually 6 point.
If you use the screw driver method above, once you get them out you replace with Allen key bolts. The screw driver generally doesn't last. Or you can buy the specific bit. I know this SP Tools bit set has the correct one http://www.sptools.com/en/product-li...r-bit-set.html
__________________
Quote:
Last edited by superroo; 28-10-2018 at 12:00 AM. |
|||
|
|
|
|
02-11-2018, 09:50 PM
|
#6 | ||
|
XR6T BA 2002
Join Date: Apr 2011
Posts: 682
|
__________________
XR6T 2002 BA
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Removal of airbag from the steering wheel
Linear Mode
