Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Escort, Cortina, Sierra and Capri

Reply
 
Thread Tools Display Modes
Old 22-02-2020, 10:52 AM   #1
Rural 351
1000+ passes
 
Rural 351's Avatar
 
Join Date: Dec 2007
Location: Mid Nth NSW
Posts: 343
Default 1972 1600 Capri engine number

Just a quick question I’ve been searching and still not sure about the engine number location on a Kent 1600 in a 1972 XL Capri, I was about to do an engine swap cause I thought my Engine didn’t have a number so it wouldn’t matter since it was a non matching car, But now I have located the matching number on the front of the block just under the head, is this normal I was under the impression it should be on the side above oil sensor. Thanks in advance Bruce
__________________
XY ute 1600+ kgs, normally aspirated pump gas 351 std stroke, cast iron 2V heads, toploader, drag radials, 11.524 - 119.48mph

https://www.facebook.com/DragRacingT...2067110055900/

http://www.cacklingpipes.com/100825_...250810_025.JPG


XA coupe naturally, aspirated Cleveland, full exhaust, 98 oct pump gas, drag radials, Manual trans, 10.664 132 mph

The faster youve gone the worse your attitude
Rural 351 is offline   Reply With Quote Multi-Quote with this Post
Old 23-02-2020, 11:19 AM   #2
Rallye Sport
RS The Faster Fords
 
Rallye Sport's Avatar
 
Join Date: Feb 2014
Location: Westralia
Posts: 1,694
Default Re: 1972 1600 Capri engine number

Try here, theres a lot of Capri guru's/ anoraks that'd be able to help
https://www.classic-ford.org/cfp/
__________________
Escort RS2000 Restored factory a/c and alloys.
TD Cortina Unrestored 35 000km 6cyl manual.
Mk1 GT Cortina Project.
FG XR50 Daily.
Rallye Sport is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 24-02-2020, 10:58 PM   #3
Capriman
formerly ford3000gt
 
Capriman's Avatar
 
Join Date: Feb 2009
Location: Buderim, Qld
Posts: 110
Default Re: 1972 1600 Capri engine number

Quote:
Originally Posted by Rural 351 View Post
Just a quick question I’ve been searching and still not sure about the engine number location on a Kent 1600 in a 1972 XL Capri, I was about to do an engine swap cause I thought my Engine didn’t have a number so it wouldn’t matter since it was a non matching car, But now I have located the matching number on the front of the block just under the head, is this normal I was under the impression it should be on the side above oil sensor. Thanks in advance Bruce
The engine number on 711M blocks is at the front of the head, right where you found it. Earlier 691M blocks had the number on the side from recollection. You've answered your own question as you have matched it to the chassis number and 711M blocks are the best 1600 blocks, as used in Formula Fords. Cheers, Terry
__________________
Current ride:
'83 Mk.3 Capri, 2.8i, 5-spd
Capriman is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 26-02-2020, 01:50 PM   #4
Rural 351
1000+ passes
 
Rural 351's Avatar
 
Join Date: Dec 2007
Location: Mid Nth NSW
Posts: 343
Default Re: 1972 1600 Capri engine number

Quote:
Originally Posted by Capriman View Post
The engine number on 711M blocks is at the front of the head, right where you found it. Earlier 691M blocks had the number on the side from recollection. You've answered your own question as you have matched it to the chassis number and 711M blocks are the best 1600 blocks, as used in Formula Fords. Cheers, Terry
Thanks Mate looks like I will rebuild the original motor,
__________________
XY ute 1600+ kgs, normally aspirated pump gas 351 std stroke, cast iron 2V heads, toploader, drag radials, 11.524 - 119.48mph

https://www.facebook.com/DragRacingT...2067110055900/

http://www.cacklingpipes.com/100825_...250810_025.JPG


XA coupe naturally, aspirated Cleveland, full exhaust, 98 oct pump gas, drag radials, Manual trans, 10.664 132 mph

The faster youve gone the worse your attitude
Rural 351 is offline   Reply With Quote Multi-Quote with this Post
Old 04-11-2020, 08:39 AM   #5
Changa
Starter Motor
 
Changa's Avatar
 
Join Date: Nov 2020
Location: Hawkesbury River
Posts: 5
Default Re: 1972 1600 Capri engine number

Hi All,

I am looking for my engine number. I have a 67 Cortina 440 that is running a 1600 Kent X flow 711 engine. Earlier engines had the number near the dizzy, badly stamped into the cast block very hard to read. I see that the later 711 engines have engine number in diff location.. Any chance someone could post a pic of the EXACT place to look for my engine number please?

TIA
Changa is offline   Reply With Quote Multi-Quote with this Post
Old 04-11-2020, 10:05 AM   #6
cosworthfreak
Regular Member
 
cosworthfreak's Avatar
 
Join Date: Oct 2006
Location: Canberra region
Posts: 352
Default Re: 1972 1600 Capri engine number

Hopefully this picture attaches properly. This is the location for all 1600 Kent Ford engines pretty much. Unfortunately, if the mating surface ever gets skimmed for a rebuild the numbers can be skimmed off as well.
Attached Images
File Type: jpeg E6B4F477-176A-4232-BB54-9CA2AAFA222B.jpeg (111.5 KB, 13 views)
cosworthfreak is offline   Reply With Quote Multi-Quote with this Post
Old 04-11-2020, 10:11 AM   #7
Changa
Starter Motor
 
Changa's Avatar
 
Join Date: Nov 2020
Location: Hawkesbury River
Posts: 5
Default Re: 1972 1600 Capri engine number

Thanks mate. I had my suspicions it was supposed to be there.
My engine was recently rebuilt and obviously skimmed.
Thanks again
__________________
Seeya ! Wouldn't wanna be ya !
Changa is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 12:02 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL