|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-05-2006, 06:25 PM
|
#1 | ||
|
FPV GT Owner!!!
Join Date: Mar 2005
Location: Bellbird Park, West Brisbane
Posts: 2,416
|
Hi,
Ive got an AU motor in my EF, and i need some wiring info as half of the connectors use different colour wiring. Ok so i need info on teh cam angle sensor which is on the timing case with the balancer. There are two wires which lead to it, one is light blue and the other is light green. Since i am wiring up a wolf 3d i need to know which one will have the 5V power supply and which wire gives the reference to the ECU??? So a set of pinouts would be great. btw, ive searched the tech DB and couldnt find anything on it. Please let me know if ive missed something.
__________________
Cars: - Ford Ranger Wildtrak - XY GT Replica - XB Coupe Project |
||
|
|
|
03-05-2006, 06:42 PM
|
#2 | ||
|
Fantastic Plastic
Join Date: Jan 2006
Location: Mars most of the time
Posts: 2,019
|
there is documents and pics in the Technical recourses for the pin-outs for the AU ecu , maybe you can track the wiring down starting from the ecu end ..gl
__________________
------------------------------------------------------------ :eclipsee_ |
||
|
|
|
|
03-05-2006, 06:54 PM
|
#3 | ||
|
FPV GT Owner!!!
Join Date: Mar 2005
Location: Bellbird Park, West Brisbane
Posts: 2,416
|
haha thats what i would do, but i have an EF, not an AU lol
I have put the AU motor in and have been driving around great for about a month. I now am installing wolf3d and need to now use the cam angle sensor on the balancer. I need to know the colours of pin 85 and pin 8 for the cam angle sensor as this will let me know which is sync and which is supply vaultage.
__________________
Cars: - Ford Ranger Wildtrak - XY GT Replica - XB Coupe Project |
||
|
|
|
|
03-05-2006, 08:36 PM
|
#4 | ||
|
Regular Member
Join Date: Nov 2005
Location: Essendon - VIC
Posts: 68
|
A multimeter should help you out.
$15 for a cheapy from dick smith. |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
AU wiring diagrams and pinouts. HELP.
Linear Mode
