|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
30-06-2006, 05:01 PM
|
#1 | ||
|
Smile
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
|
I am trying to work out a way to install traction control to my wagon. Looking at the au 1 pcm pin 6 is the transmission control engine torque output.
Pin 62 is the traction control engine torque request pin. What I would like to find out is the hardware rquired to make traction control work on a non traction controlled car. I know the computer supports it but I need to know what mechanical parts are required..??
__________________
Stingray Car Security ph 0414445444 Single din radio fascias for fg to fgx fords Australia wide . FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/ Site Sponsor See Sponsor Stingray Car Security 😍👌✌ AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again 
|
||
|
|
|
30-06-2006, 05:14 PM
|
#2 | ||
|
Regular Member
Join Date: Oct 2005
Location: Melbourne
Posts: 154
|
Useless
It works in conjunction with the ABS |
||
|
|
|
|
30-06-2006, 05:16 PM
|
#3 | ||
|
Smile
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
|
Looking at wiring diagrams it appears to be just one switch to earth from pin 31 from the abs module.This is light blue /pink wire and it earths via the junction box.
__________________
Stingray Car Security ph 0414445444 Single din radio fascias for fg to fgx fords Australia wide . FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/ Site Sponsor See Sponsor Stingray Car Security 😍👌✌ AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
|
||
|
|
|
|
30-06-2006, 05:24 PM
|
#4 | ||
|
Smile
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
|
i wonder if sylox has traction control in his ute xr8 ute?
__________________
Stingray Car Security ph 0414445444 Single din radio fascias for fg to fgx fords Australia wide . FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/ Site Sponsor See Sponsor Stingray Car Security 😍👌✌ AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
|
||
|
|
|
|
01-07-2006, 02:58 PM
|
#5 | ||
|
TL40 Wagon?
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
|
If you have ABS and get an AUII fairmont wagon ecu and BEM it should be able to be done but hard work.
nope your not getting mine! |
||
|
|
|
|
01-07-2006, 03:48 PM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2005
Location: Ipswich, Qld
Posts: 557
|
Also the ABS module is different, the traction unit uses a 4way ABS module not the 3 way unit that most AU 1 ABS cars have like my wagon
 :
|
||
|
|
|
|
01-07-2006, 04:29 PM
|
#7 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne, Victoria
Posts: 2,434
|
Yup, you also need a ABS Traction Control Unit. Which are $1xxx. However there was one on eBay recently for $300. Not sure whether it sold.
// Edit... It is relisted: http://cgi.ebay.com.au/ABS-brake-mod...QQcmdZViewItem
__________________
AUIII Falcon Forte, with SIX Appeal |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Adding traction control to AU1?
Linear Mode
