Welcome to New Members - Post here to say gday!

[GasoLane]

Originally Posted by Ozyr32

Hi and thanks for adding me...not sure if this is where I post this but my wife has a 2012 ford territory TS and her battery went flat on Wednesday. That's all fixed now but since then her centre display screen in the car isn't working. I have tried disconnecting the battery for about half an hour but it still doesn't work. Ford said I may have to replace the screen which could cost up to $1000. Any advice?

Welcome to AFF and have a look in the Terry forums.
http://www.fordforums.com.au/forumdisplay.php?f=315

If the answers not there someone may be able to help.

[Satanach]

Greetings fellow Blue bloods thanks for the add am getting My XK ute back on the road gunna run a 170 with a 2V head and single rail 4speed I know every body runs 250,s but the powers that be here in South Oz are flexing their god mode and saying we want only what the structure stresses can handle and even with an engineers report dont want old cars on the road so any suggestions on fitting a single rail to a narrow block 170 would be greatly received. Cheers.

[Toera]

Hi There to all the current members
Thanks for adding me!!
I own 2 x 1968 ford fairlanes, I love the sound of a pure V8 engine and the old school look.
I do all the mods myself and have a passion for these old cars.

[Vincenzo]

I own 2 x 1968 ford fairlanes - Sedan / Coupe / Convertible or Wagon

Cheers Vinny

[Toera]

They are both sedans

[Vertigo4u]

Gday all. After bouncing around like Ace Ventura in a Jeep Wrangler for about 13 years, it was time for some luxury in my life.
So without doing enough research I'm finding out now, I lashed out and got myself a 2003 XR8 Phantom. On the whole it's great, but you know, things tick, clunk and just seem a little funny. So yeah questions will be asked in due course. But hey it does get better fuel economy than the Jeep. So I'm winning straight off the bat.

This thing ate up the Great Ocean Road the other week. And we got airborne!
Love'n it. Mmmmm leather.

[bm069au]

Hi Guys.
I joined for some questions I have with my ford.
Its a 2010 Ford Fiesta LX 5DR.

I bought my car new from Adelaide, it only has 46k on the clock and I padded up the seats to make them firm and comfortable. Its a black car so in that regard I now hate it but its by far the best car I have ever owned and out performs all the newer models of the Fiesta in power and performance.

I am having trouble with the stereo and want to play with USB sticks rather than CD media which skips too often. I was looking for ways to enable bluetooth music but it seems I cannot on my model.

My next option would be to replace the head with one from a Zetec. Does anyone know if the sizes are exactly the same and what I need to replace ? The youtube vids make it look very easy to replace the head unit.

Brett.

[GasoLane]

Originally Posted by bm069au

Hi Guys.
I joined for some questions I have with my ford.
Its a 2010 Ford Fiesta LX 5DR.

I bought my car new from Adelaide, it only has 46k on the clock and I padded up the seats to make them firm and comfortable. Its a black car so in that regard I now hate it but its by far the best car I have ever owned and out performs all the newer models of the Fiesta in power and performance.

I am having trouble with the stereo and want to play with USB sticks rather than CD media which skips too often. I was looking for ways to enable bluetooth music but it seems I cannot on my model.

My next option would be to replace the head with one from a Zetec. Does anyone know if the sizes are exactly the same and what I need to replace ? The youtube vids make it look very easy to replace the head unit.

Brett.

Welcome to AFF, head over to the Fiesta Section and ask there.

http://www.fordforums.com.au/forumdisplay.php?f=78

[BFGasUte]

Hello,

Another option for a failing CD player is a MP3 player that transmits on the FM band. They cost around $10 and work quite well. I use one, and it is a cheap easy solution. Takes SD or a USB stick. Plugs into the lighter. Have a look on E Bay.

[andrewsteel]

hi all

new user from new zealand, I work in auto industry and think the forum be a good way to learn of problems and fixes

[SOS MacK]

G'day all,
new country NSW member. Have had 5 ford Fairlanes over a long period; all 6 cyl cars. Am looking at 2007 BF LTD 5.4 L V8. No knowledge of motor & guess I'll be looking for help/ expertise.
SOS MacK

[rhysdoesntexist]

Hey folks,
Thanks for approving my membership. I'm the proud new owner of an '03 BA XR6T Ute in sapphire blue. My reason for joining the forum is that I want to keep this car for as long as humanly possible and that means knowing all I can about it. I figured this is the perfect place for such an education. I'm a huge geek and a bit of a hacker, so I'd love to see if any of my skills in the computing/circuitry area translate into the automotive realm. Look forward to dealing with you all!

Cheers,
Rhys

[SYZ]

Hey there Andrew, Mack, and Rhys, welcome to the forums.

Hope you find something here that helps you out. Look forward to your input fellas.

[jandswhite]

Hi it's been a little while since I last got on glad to see the site is still going found it back in 2005 an pop in an out I don't always log on

[RobFPVGT]

Hi guys, I haven't had chance to say thanks for invite.
Great site for all ford information, etc.,
I own 2014 GT, Cheers

[badteddy460]

hi folks i own a 2002 fairlaine ghia 6 and the hand has come up on the dash because of flat battery i put a new battery in an still wont start tried leaving ignition on for 61 min still no crank of the motor but everything else works fine any help please darren

[GasoLane]

Originally Posted by badteddy460

hi folks i own a 2002 fairlaine ghia 6 and the hand has come up on the dash because of flat battery i put a new battery in an still wont start tried leaving ignition on for 61 min still no crank of the motor but everything else works fine any help please darren

Welcome to AFF Darren.
Try posting your question in the AU-BF section.


http://www.fordforums.com.au/forumdisplay.php?f=30

[Timm351]

Hi guys joined today. Have just taken possession of a partly restored XE interceptor, got all the original bits, it's taking me back to my first Ford. Looking forward to finding out info from you guys and sharing the journey.
Timm

[Drive she said]

Hello all,
I have joined to find as much information about XH panel vans as I can. I hope to end up with a decent one on gas and manual. I plan on tripping around and a bit of towing. At this stage I think it would be easier to find one on gas then do the manual conversion rather than the other way around. Thoughts and suggestions appreciated!
One thing I am having trouble finding is the information on the XH ID plate.
Thanks,
Jim.
ZC Fairlane
XY Fairmont

[BA_futura_wagon]

Hi guys!

I'm a 12 year old girl. I was born in November 2003 in Broadmeadows Victoria. I've driven approximately 260,000 kms. I think I may have leprosy because lots of little bits keep falling off me. I have recently just started leaking 3 different fluids all from the same area around my Water pump/Power steering pump/Cam chain tensioner but I'm told this is normal for girls my age. I vibrate a bit when hard on the stoppers and I always complain if I'm driven too hard over bumps - I think my front end is a bit loose.

Anyway, I just thought I'd show off a picture of my motor for all you guys to drool over.

20160316_194636.jpg

Thanks for having me guys!

BArbara.

[Vincenzo]

Hi Bar Bar a

Originally Posted by BA_futura_wagon

I'm a 12 year old girl.

Starting young!

Originally Posted by BA_futura_wagon

I think I may have leprosy because lots of little bits keep falling off me.

If they drop off early enough, it stimulates regrowth.

Originally Posted by BA_futura_wagon

I have recently just started leaking 3 different fluids all from the same area around my Water pump/Power steering pump/Cam chain tensioner but I'm told this is normal for girls my age.

Unfortunately Bar Bar a, it's called Puberty. My Daughters tell me it was a very hard time!

Originally Posted by BA_futura_wagon

I vibrate a bit when hard on the stoppers and I always complain if I'm driven too hard over bumps - I think my front end is a bit loose.

again I can only say puberty sucks!

Originally Posted by BA_futura_wagon

Anyway, I just thought I'd show off a picture of my motor for all you guys to drool over.

Originally Posted by BA_futura_wagon

Attachment 91547

It does look a little tired and droopy but I think a shower using soapy water might just do wonders.

Cheers Vinny

[BA_futura_wagon]

I was recently bought by my new owner for 1700 bucks. I think my owner thought I was in slightly better condition than I am. I do however have one redeeming feature - a very tight rear end.

Here is a list of things my new owner has been complaining about:

ICC top triangle broken
T-bar plastic bubbled and cracked
Gear knob crack bubbling(.. I'd better not..)
Drivers seat trim cracked
Rear speaker covers perished
Cup holder cover broken (again I shall refrain myself)
Drivers seat front mounts broken off
Right rear indicator has a .45 calibre sized hole in it
Stone guard deflector flapping
Exhaust has been welded and tip is a bit bent
Right rear door central locking not working
Drivers seat belt barely retracts maybe
Left rack end loose (ahem)
Left tie rod end worn
Swaybar D rubbers loose (excuse me)
Bald rears (probably normal at my age)
Steering wheel peeling
Power steering leak
Heater hose to water pump leak
Cam chain tensioner oil leak
Front grill tech-screwed at one side and flapping from broken bottom clips
Stains on carpet in cargo area .. Etc. Etc. Etc......

This is after a quick preliminary check. When they get me up on the hoist the fun will really begin.

I guess as you said vinny it may just be puberty but I have been around the block a fair few times.

[Vincenzo]

That is really more information than I need to know and i'm very happy you have a tight rearend!

Keep your chin up and i'm sure your new owner will try very hard to fix all your inadequencies.

Cheers Vinny

[gilly2497]

Hi all,
Due to pick up my XR8 on Monday after 3 years of ownership of a WRX.
The WRX was a nice car but missed the V8 sound / performance.
Last V8's were a headed / cammed VY ute and before that a twin turbo VE SS.
Already looking forward to getting a tune and see how the new car goes but will probable wait until after the 3k service.

Cheers

[roddy1960]

Originally Posted by BA_futura_wagon

I was recently bought by my new owner for 1700 bucks. I think my owner thought I was in slightly better condition than I am. I do however have one redeeming feature - a very tight rear end.

Here is a list of things my new owner has been complaining about:

ICC top triangle broken
T-bar plastic bubbled and cracked
Gear knob crack bubbling(.. I'd better not..)
Drivers seat trim cracked
Rear speaker covers perished
Cup holder cover broken (again I shall refrain myself)
Drivers seat front mounts broken off
Right rear indicator has a .45 calibre sized hole in it
Stone guard deflector flapping
Exhaust has been welded and tip is a bit bent
Right rear door central locking not working
Drivers seat belt barely retracts maybe
Left rack end loose (ahem)
Left tie rod end worn
Swaybar D rubbers loose (excuse me)
Bald rears (probably normal at my age)
Steering wheel peeling
Power steering leak
Heater hose to water pump leak
Cam chain tensioner oil leak
Front grill tech-screwed at one side and flapping from broken bottom clips
Stains on carpet in cargo area .. Etc. Etc. Etc......

This is after a quick preliminary check. When they get me up on the hoist the fun will really begin.

I guess as you said vinny it may just be puberty but I have been around the block a fair few times.

G'day..You must have been a cop car ,C'mon own up to it , you have to admit to a problem before you can fix it..
Cheers Rod

[Jess1992]

Originally Posted by gilly2497

Hi all,
Due to pick up my XR8 on Monday after 3 years of ownership of a WRX.
The WRX was a nice car but missed the V8 sound / performance.
Last V8's were a headed / cammed VY ute and before that a twin turbo VE SS.
Already looking forward to getting a tune and see how the new car goes but will probable wait until after the 3k service.

Cheers

Nice pick up. The xr8s are beautiful. You will miss the handling of the wrx, after the WRX the Falcons feel like boats lol

[roddy1960]

Originally Posted by BA_futura_wagon

Hi guys!

I'm a 12 year old girl. I was born in November 2003 in Broadmeadows Victoria. I've driven approximately 260,000 kms. I think I may have leprosy because lots of little bits keep falling off me. I have recently just started leaking 3 different fluids all from the same area around my Water pump/Power steering pump/Cam chain tensioner but I'm told this is normal for girls my age. I vibrate a bit when hard on the stoppers and I always complain if I'm driven too hard over bumps - I think my front end is a bit loose.

Anyway, I just thought I'd show off a picture of my motor for all you guys to drool over.

Attachment 91547

Thanks for having me guys!

BArbara.

G'day Nice to meet you BArb, I knew your sister Fairie for a while..Nice girl..She had all the Ghia..dressed real nice..and she liked to lift her skirt occasionally and show everyone her long legs..A bit too hoity toity for me though and moved on about two weeks ago..I've adopted her cousin though We call her Effie Gee she's a sweet young thing..She's XtRa Sixxy..Re your waterworks..Go to your local motor GP or GTP..A car incontinence product called "Gasket Kit" comes in plain discreet packaging..He'll diagnose your condition straight away , sit you down and talk to you and your owner about best course of treatment..and give you a referral to a specialist if that's necessary..Don't be embarrassed..it's a natural part of ageing.and he's seen it all before Don't put it off or there might be complications .How's your rack.. Your sister was just starting to show issues..might run in the family..Got to have a good rack. Anyway..good to meet ya.. Cheers Rod..and EFFie says G'day too.

Hi im looking for a intermediate steering shaft 1999 au xr8 falcon ute anyone got one for sale cheers Shaun 0413451955

[Shane Abbott]

Hello there, thank you for allowing me to become a member of the Ford forum AU.
I'm in the process of doing a mode to a 1964 Ford F100 twin I beam, I've replaced the engine with an Australian Ford Falcon 4:0 litre fuel injection type with auto box.
I've been trying to simplify the wiring harness by just using the engine & gearbox management system but I've run into a snag because l'm not able to get my hands on a colour wiring diagram for the section , please help- thanking you in advance for your kind help to this matter.

Regards Shane Abbott
Zimbabwe

[BFGasUte]

Hello Shane,

What is the engine out of that you have ? The early EA was made for a short period of time with a Carb version. Wont run as well as injection, but less likely to get stuck also. On E Bay you will be able to find a service manual CD. Have a look, it will be nice to see some Pics of you project. If you are able, watch the Charles Bronson movie Mr Majestik. It has an old Effie that takes some punishment !