Big Brake Upgrade Specials

[Romulus]

PM sent re Super Pursuit brake parts.

[FLOORED]

Originally Posted by MadMaximus

Spoke to PBR today and they said that the kit was actually designed to fit behing the standard BA XR6 Rims.

I have downloaded the template and will check on the weekend.

If you could get us a price including postage to 3178 would be great but I am thinking the postage would put it over what I might be able to get them locally.

Cheers

James

As i mentioned in the PM this is a bargain and one that wont be repeated for that price i reckon.

[OED666]

Matt,

any word when the brake kit might be ready?

[FLOORED]

Originally Posted by OED666

Matt,

any word when the brake kit might be ready?

Being done as we speak - will phone you with the update - thanks mate

[twr7cx]

Is the 4 piston E-series kit the old Cebco kits?

[twr7cx]

Originally Posted by FLOORED

I don't mean to hijack your thread but we do the E series upgrades in 2 piston kits and have sold many of these with great success and we use a new AU11 Ford caliper not a Commodore one.We can also do 4 piston kits as well and brake pads are available in anything from Ferodo to EBC, Hawk and SBS.
Here are our Ford forum member specials
2 piston 330mm kits from $1990 ( no offset change and 1 piece dba slotted rotor)
4 Piston caliper on a 1 piece 330mm rotor $3500 AP Calipers
4 piston caliper on a 2 piece 343mm rotor $4000 AP Calipers
Also - The E Series twin piston 330mm brake kit made to move the wheel out 35mm from the current std offset will cost $2600
You can find the special and the listing on this thread link
http://www.fordforums.com.au/showthr...1226310&page=1

The 2 peice disc rotors, are they DBA brand?

What about the pads for the 4 piston AP Racing calipers, do Bendix/Ferodo make pads for them?

[FLOORED]

Originally Posted by twr7cx

The 2 peice disc rotors, are they DBA brand?

What about the pads for the 4 piston AP Racing calipers, do Bendix/Ferodo make pads for them?

It isn't a Cebco kit .The kit uses a non DBA rotor but we can make them using the DBA rotors if requested.Ferodo racing do make the pads but not Ferodo (Taiwan) or Bendix.

[twr7cx]

Originally Posted by FLOORED

It isn't a Cebco kit .The kit uses a non DBA rotor but we can make them using the DBA rotors if requested.Ferodo racing do make the pads but not Ferodo (Taiwan) or Bendix.

So this mob for the brake pads - http://www.ferodoracing.com/it/car_racing/home.htm, not http://www.motospecs.com.au/ferodo.php . So they're not just some normalish DB number then.

[twr7cx]

And just to confirm the 343mm kit retains the E-series offset or takes it out to AU-onwards on the front?

[IH8TOADS]

What would the 355mm kit for a BA cost with 2 piece DBA rotor? Cheers.

[CSV_LS1]

Are the 4 spot rear brembos available separately? Wouldn't mind upgrading my standard FPV Brakes.
Thanks

[HSE2]

I have a AU 1 that was upgrades with AU 2 uprights to take the cebco two piece twin piston upgrade.

What needs to be done to accept the brembo 4/4 kit?

[XRQTOR]

Originally Posted by HSE2

I have a AU 1 that was upgrades with AU 2 uprights to take the cebco two piece twin piston upgrade.

What needs to be done to accept the brembo 4/4 kit?

They should fit if you have the AUII gear already on it.

[OED666]

Hey Matt,

I got the brakes... and I am very happy... They should be on this weekend.

Just one question, was there meant to be ball joints fitted? The only reason I ask is I noticed they were in the pictures?

Paul

[FLOORED]

Originally Posted by OED666

Hey Matt,

I got the brakes... and I am very happy... They should be on this weekend.

Just one question, was there meant to be ball joints fitted? The only reason I ask is I noticed they were in the pictures?

Paul

Sorry mate they are not supplied and i normally mention that when i quote so i am sorry if i didn't mention it.The photo in this thread was from the kit we fitted for the street ford project EB and was the only one i had.Sorry and i have amended the listing for it to say they are not included.

[OED666]

no worries... cant wait to fit them on the weekend..

[CAT600]

Got my 6/4 combo on Monday Matt : talk about fast freight!

Thanks a lot, the packaging and delivery was spot-on........Weekend is looking good!

Daniel

[FLOORED]

No worries sounds like a busy weekend for you both and thanks CAT600 and OED666 for your support

[Ride]

Don't spose that you're reducing the price on 4/4 brembos anytime soon? Willingness is there but the funds don't come close to your special price :/

[FLOORED]

Originally Posted by Ride

Don't spose that you're reducing the price on 4/4 brembos anytime soon? Willingness is there but the funds don't come close to your special price :/

PM or email me with what funds you have as we can chop and change parts to suit different budgets.

[CSV_LS1]

Originally Posted by CSV_LS1

Are the 4 spot rear brembos available separately? Wouldn't mind upgrading my standard FPV Brakes.
Thanks

?????

[FLOORED]

Originally Posted by CSV_LS1

?????

Not sure whats happening but we can sell just a rear Brembo kit if needed thanks.

[CSV_LS1]

Originally Posted by FLOORED

Not sure whats happening but we can sell just a rear Brembo kit if needed thanks.

And at what price?

[XH5LWEPN]

Originally Posted by FLOORED

The E Series twin piston 330mm brake kit made to move the wheel out 35mm from the current position we use which is std offset will cost $2600.I have one set of ABS uprights here to use but would need to either have the customers or i could source some to buy outright which will make the kit a bit dearer.I f i could have the wheel you are using when making the kit that would be of great help so it can be confirmed

Is this still available?
Im looking at running AU offset on the front of my XH ute.
Wheels i will be using are Speedy Cheetah 19x8.5" with the AU offset of 35.

Cheers
Jeff

[FLOORED]

Originally Posted by XH5LWEPN

Is this still available?
Im looking at running AU offset on the front of my XH ute.
Wheels i will be using are Speedy Cheetah 19x8.5" with the AU offset of 35.

Cheers
Jeff

The kit is made to order and to buy the uprights outright it is an extra $100.As we do not have the car and wheels here to make the kit we have to be specific as to what is ordered.The price is the same thanks.

[FLOORED]

Originally Posted by CSV_LS1

And at what price?

From $2500 depending on the type of rotors wanted and pads thanks

[ROOSTA]

Hey,

I have been considering doing an upgrade on my ED for a while now.. I am currently running 19" pre au rims so clearance wont be an issue but i would like to keep the ED offset.. I would basically just like to fill the rims up a bit and improved braking would be a plus.. LOL..

What price would I be looking at to upgrade the fronts and rears to larger diameter discs? I would also like drilled and slotted discs..

Cheers,
Nik

[FLOORED]

Originally Posted by ROOSTA

Hey,

I have been considering doing an upgrade on my ED for a while now.. I am currently running 19" pre au rims so clearance wont be an issue but i would like to keep the ED offset.. I would basically just like to fill the rims up a bit and improved braking would be a plus.. LOL..

What price would I be looking at to upgrade the fronts and rears to larger diameter discs? I would also like drilled and slotted discs..

Cheers,
Nik

The kit is $1990 with slotted rotors and we don't offer the xdrilled option sorry.There is not a rear upgrade option but generally rotors are changed to slotted and better pads replaced.The front kit is a twin piston kit with 330mm rotors and you will need to fit new ball joints and a wheel alignment after fitting.ABS sensor rings are supplied if it is an ABS equipped vehicle.We have 1 kit left at the moment at this price with exchange stub axles.A $100 deposit for the stub axles is needed or if not exchanging stub axles then they can be purchased for the extra $100 thankyou

[larry8]

hey,

i just purchased an xc fairmont with stock 14" i beleive and i was wondering if your company has anything in the way of front and back calipers with disks for this sized tyer aslo im after some stopping power as in the future i will be droping an eight into the car.

[FLOORED]

Originally Posted by larry8

hey,

i just purchased an xc fairmont with stock 14" i beleive and i was wondering if your company has anything in the way of front and back calipers with disks for this sized tyer aslo im after some stopping power as in the future i will be droping an eight into the car.

Larry8 the only option would be to go to 15" wheels and then we can supply a twin piston upgrade on the front from $1350.If the rears are drum brakes just leave them as is.