Welcome to New Members - Post here to say gday! - Page 214

mel67f100 · 23-09-2021, 11:30 AM

Hi Everyone - new here: I've just purchased a 67 F100 in restoration and cannot work out what my ID plate reads. I have a chassis number but it's not the full 14 digits of a normal VIN so can't find out if I have a 67 or 68 it looks like a 67 but not sure. Can someone please help. How come we don't have a normal VIN#

Prefix: AK1JHE Serial# 3931 SIDO# 407786 Model: 61811D41

Engine: D Trans: L RR.AX: B FT.AX: A Paint: S Trim: Y

GVM: 5400 NET HP: 129 RPM: 4000

Chassis# FD35985

Thaks

**GasoLane** · 23-09-2021, 11:58 AM

Quote:

Originally Posted by mel67f100

Hi Everyone - new here: I've just purchased a 67 F100 in restoration and cannot work out what my ID plate reads. I have a chassis number but it's not the full 14 digits of a normal VIN so can't find out if I have a 67 or 68 it looks like a 67 but not sure. Can someone please help. How come we don't have a normal VIN#

Prefix: AK1JHE Serial# 3931 SIDO# 407786 Model: 61811D41

Engine: D Trans: L RR.AX: B FT.AX: A Paint: S Trim: Y

GVM: 5400 NET HP: 129 RPM: 4000

Chassis# FD35985

Thaks

Welcome to AFF Mel. Your best bet would be to ask in the F series section.

https://www.fordforums.com.au/forumdisplay.php?f=243

Kani · 01-10-2021, 12:43 PM

Heya I'm from Darwin and new to the group.
Just looking for someone with any info or expertise on a matching numbers 1971 XY 302 Falcon 500 wagon in teal glow.
Minimal rust and finding it difficult to find anything on it. Have contacted Ford but I'm sure most of you will know it takes a while.
Be much appreciated

PimpMyHubcap · 03-10-2021, 06:50 PM

Howdy all.....again

Traded my 2003 Ice Mint BA years ago but stayed in here lurking for the entire time. Now my son has gone and done something silly and bought a ...... 2003 Ice Mint BA and then moved into the city where he doesnt need it and now wants me to fix it and sell it for him

The fun never stops. Havent seen it yet but sounds like the horn and auto has problems with a couple of oil leaks so I`m back to suck info from the forums.

Anyway its good to be back.

Cheers
Mick

CMattes · 06-10-2021, 10:27 AM

Howdy Folks,
Thanks for letting me in! I'm looking forward to the banter and the valuable info! My rides are a knock about 09 WS Fiesta Zetec mk7 and a more lively 18 Focus RS mk3 Limited Edition. This much fun should be illegal!

allan reid · 06-10-2021, 01:00 PM

Hi all Ford friends, I am new to this site and look forward to being part of Australian Ford Forums. Proud owner of a FG Turbo XR6.
Thank you for accepting me in to your group

Mtoohey · 06-10-2021, 01:12 PM

Hi guys,

Thanks for letting me join. I own a 2006 bf Fairlane Ghia. She’s a nice car. I hope I’ll be able to get some help. I’ll post another post and ask my questions.

Thanks again guys

Marnie

Jared.m · 07-10-2021, 04:22 PM

Hi All,

I am a Fixed Operations Manager at a Ford dealer here in NZ.
I own 2 mid 70’s F100, Oz assembled. One 4x4 short bed, the other 2wd Long bed. Both 351 Cleveland.

Thanks

Jared

IAN94 · 10-10-2021, 04:52 PM

Hi All, Thanks for letting me join. We have ordered a 2021.54 2.3 L HP Coupe.
Look forward to further contact after the arrival.
Thanks again Guys,

IAN94

Gone but not forgotten 94 Honda NSX

Scottmefooked · 13-10-2021, 07:47 PM

Hi thanks for letting me join, I have had a few Ford's over the years, 69 xt, 82 xd, 84 xe and a 74 f100 Canadian 300. Haven't had a ford for 20 odd years but now I have an xg pano and an AU2 ute

NUGs22 · 14-10-2021, 09:39 PM

H fellow Ford enthusiasts. I am the proud owner of a 1996 XH Falcon and i am finding the experience.. challenging. Hard to get parts and searching endlessly for information, as i try to educate myself and learn along the way. Thanks for the add, i hope to benefit from the vast experience of others and get my **** box looking like i want it too, cheers everyone.

Marwan Makhlouta · 18-10-2021, 08:43 AM

Hi Guys,
Thanks for letting join, I’m from Sydney and own an Everest Titanium.

Canino · 20-10-2021, 09:24 PM

Hi everyone. Thanks for adding us. I own a ford xc coupe. Looking for a formula for the original colour if anyone has it and is willing to get in contact with me the colour if fire glow or code y.
Thanks !
Chris

FGXR6UTE09 · 22-10-2021, 02:28 PM

Joined to help sort issues with my old mans 2009 FG Falcon XR6 Ute.

93Festiva · 25-10-2021, 09:45 AM

Hi Everyone! I'm glad to have found this forum for Australian Fords! I live in British Columbia Canada and have a 1993 Ford Festiva 2-door hatchback that i need some help with specifically from Australian experts. I'll post my questions in the appropriate forum, but need some help adding Australian specific parts to my car.

Cloudy · 25-10-2021, 12:07 PM

Hi all. Thanks for the site. Here to ask some questions on the elusive blank screen problem on the territory.

andymb1 · 28-10-2021, 11:30 AM

G'day all, thought I had already completed this welcome note but it didn't go through first time- speaks to my competencies.

Living the dream in Glen Alvie,driving a 2015 Everest Trend and looking for answers for the adBlue heater disaster.

Loving the variety of material you have shared in this site.

Andy

Mikey21 · 02-11-2021, 07:08 PM

Hi,

Are the front LH and RH drive shafts the same (interchangeable) on 2005 FORD Territory AWD?

Cheers,
Mike.

**GasoLane** · 02-11-2021, 07:11 PM

Quote:

Originally Posted by Mikey21

Hi,

Are the front LH and RH drive shafts the same (interchangeable) on 2005 FORD Territory AWD?

Cheers,
Mike.

Wrong thread, you need to ask the question here...https://www.fordforums.com.au/forumdisplay.php?f=85

JM81 · 03-11-2021, 06:02 PM

Hi everyone,

Thanks for adding me.

MFL · 06-11-2021, 07:18 PM

Hi All,

I just got a 2005 BF XR8 manual, that had been sitting in a shed in Townsville, for 10 years, owner got it up and running before selling it. In Sydney now, runs well, but I'll be changing all the fluids & coolant, before driving it hard.

Looking forward to the forum, and working out what was and wasn't done to the XR8

nev351 · 06-11-2021, 09:12 PM

gday all, i recently got a ba v8 . ive had a few fords but always 6’s so this is my first 8 . awesome beast but ye as many say i noticed it doesn’t wake up until you hit 3 to 3.5 revs. so looking into changing diff gears to as a first mod , cheers

Glyn · 08-11-2021, 11:27 AM

Hi Guys,
Thanks for accepting me, I Have been away from Ford for a while,....... but I'm Back :-) just bought 2021 Ranger Wildtrak and loving it. Good to be Back behind the wheel of a Ford again.

Citroënbender · 08-11-2021, 11:38 AM

Welcome. The eastern states’ lockdown sent a few of us stir-crazy for a while, but things are levelling up in the forum again…

2015 Tickford Ranger · 10-11-2021, 09:30 AM

Hi everyone

Hope you are all well. hard at work and staying out of trouble.

Kizcanb · 13-11-2021, 05:25 PM

Hi I'm Kizza from Canberra I had quiet a few b series falcons and at the moment have a egas ba ute cheers

Kizcanb · 13-11-2021, 05:48 PM

Hi I live in Canberra and have ba e gas that is immobilised, I still have key that fits ignition and doors I just lost the key with the chip in it.. I need to no how to start it without getting new key programed,,,, I can't afford to get key coded for cpl weeks and they crushing it in cpl days if I don't move it,, **** priks steal these everyday please someone help me start my car to not get crushed... Please sorry if this posted wrong place I never join forum before

**GasoLane** · 13-11-2021, 05:56 PM

Quote:

Originally Posted by Kizcanb

Hi I live in Canberra and have ba e gas that is immobilised, I still have key that fits ignition and doors I just lost the key with the chip in it.. I need to no how to start it without getting new key programed,,,, I can't afford to get key coded for cpl weeks and they crushing it in cpl days if I don't move it,, **** priks steal these everyday please someone help me start my car to not get crushed... Please sorry if this posted wrong place I never join forum before

Try asking in the AU to BF forum....

https://www.fordforums.com.au/forumdisplay.php?f=30

Andrew1136 · 14-11-2021, 06:11 PM

As a lockdown project I bought an ECU from a wrecker on eBay for $50, and hooked it up to my Arduino setup and was able to read the 17 digit VIN by hacking into the CAN bus with a C++ script, mode 9 pid 2.

The NEVDIS site confirmed that it was from a written-off 2009 FG Ford Falcon ute, eGas. I now want to overwrite the VIN and return the ECU to it's original factory state using my Arduino setup and was wondering if anyone here has done this? I assume I could probably do this with Forscan on Windows, but I am a MAC user and want to keep my costs down.

55 ford f100 · 15-11-2021, 12:24 PM

Hi Guys new here and i need help hope someone can help.LOng story cut short i have a 1955 F100 project and have used an AU fairlane as donner car,i have used the wiring loom from fairlane and all running gear,problem is i cant get any response from key when trying to start engine I NEED HELP

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode