|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
01-07-2007, 06:42 PM | #1 | ||
FF.Com.Au Hardcore
Join Date: May 2007
Location: Melbourne - Eastern Suburbs
Posts: 956
|
As the title says, just wondering which would be the best to go for. Mostly from a performance point of view.
I know there are a few threads on exhausts at the moment, but none of them have answered this question (from my quick overview). |
||
01-07-2007, 06:52 PM | #2 | ||
Miami Pilot
Join Date: Jan 2005
Location: ACT
Posts: 21,703
|
Best in terms of performance is anything that is mandrel bent. 2.5" is plenty big enough for an I6 (even a mild V8), so it's not like one system is going to outflow another system by a huge amount. Straight through mufflers are better for air speed through the exhaust, and probably outright power.
There are a number of brands that you can get - lukey, redback, genie, etc. Redback fitted is under $400; don't know about the rest, but ring your local exhaust place - they may even have developed a "custom" mandrel bent one at a reasonable price. You will need to run the rear resonator on an auto if you don't want any droning, and it doesn't make a lot of difference, if any, to power output, as resonators/hotdogs are usually straight through mufflers, just small ones. Interms of extractors, the Pacemaker 4499s are a good mid-priced system suitable for all I6s - you will see an increase in torque for any I6, though the VCTs tend to suffer a small power loss with these compared to the 4480s, but 4480s are not very good for non-VCT, unless the car is heavily modified (you lose too much torque due to the larger primary pipe size). Extractors should be around, or under, $600 fitted (except the 4480s, which are closer to $900 odd). Having said all that (especially the bit about the VCTs), Zhodak just had 4499s, a new 2.5" cat and redback (we think) 2.5" mandrel bent system fitted to his 2000 model AU2 Ghia (VCT) auto, and the power increase, especially down low, ie from take off, is amazing. It takes off better than his sister's Porsche Boxter (but naturally would lose out after 40km/h). It is easily the best Auto I6 I have driven in terms off outright launch and kick down response, and this is one that doesn't have a Hi-stall in it.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
||
01-07-2007, 07:04 PM | #3 | ||
Banned
Join Date: Jan 2005
Location: Beaumont Hills
Posts: 2,536
|
I went and priced a cat back 2.5inch system for my sisters EF.
Carline mufflers - $440 its half off the shelf and half custom. I thought that was a rich. I bought Difillipo extractors, $625, havnt put them on yet, sorting out a gearbox issue at the moment. |
||
Thread Tools | |
Display Modes | |
|