|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-10-2007, 06:27 PM
|
#1 | ||
|
We got a live one Maxy
Join Date: Sep 2006
Location: Sydney
Posts: 9
|
Hi there guys,
I have an issue with the aircon/heater fan in my AUII Futura. Everytime I accelerate above 2000rpm the air is re-diredted out to the windscreen instead of through the vents. Once the car reaches it's cruise the air is again directed through the vents. Sounds like a vac line isn't doing it's job or something similar to me. Would like to get this sorted out before the heat arrives. Thanks guys  : |
||
|
|
|
01-03-2018, 08:12 AM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2010
Location: NSW
Posts: 680
|
Bit of a thread mine here I know but has anyone got a solution to this? Mine would be more engine bay related I think as the car has recently had an engine swap
|
||
|
|
|
|
05-03-2018, 08:39 PM
|
#3 | ||
|
Donating Member
 Join Date: Jan 2007
Posts: 293
|
5.8,
It is a record thread mine alright. Re the problem, it sounds like vacuum related. Check vacuum lines in engine bay. Regards, George V. |
||
|
|
|
|
05-03-2018, 08:47 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2007
Location: Sydney
Posts: 2,530
|
Here's a recent thread that will help:
https://fordforums.com.au/showthread...ghlight=vacuum |
||
|
|
|
|
05-03-2018, 08:53 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2010
Location: NSW
Posts: 680
|
I fixed mine, it was the vacuum line beside the fitting where the brake booster hose connects. It had come off, I was probably a bit slack hooking it up when I put it back on.
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
AUII Futura Demister prob
Linear Mode
