|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
28-01-2008, 05:20 PM
|
#1 | ||
|
WNTDAU
Join Date: Feb 2007
Posts: 77
|
is the tacho signal in pin 45 on the ecu because on mine that pin is empty. im guessing there should already be one in there. can some one please help
__________________
aufalcon.com/travz_auxr6 |
||
|
|
|
28-01-2008, 05:28 PM
|
#2 | ||
|
WNTDAU
Join Date: Feb 2007
Posts: 77
|
i found the problem i counted wrong sorry to waist anybodys time
__________________
aufalcon.com/travz_auxr6 |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
tacho signal
Linear Mode
