Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Escort, Cortina, Sierra and Capri

Reply
 
Thread Tools Display Modes
Old 25-02-2008, 08:15 PM   #1
slo
Starter Motor
 
Join Date: Feb 2008
Posts: 15
Default how do you tell gt cortina from the compliance plate

i just got a cortina mk11 440 its got a gt dash gt motor and all the running gear looks like its gt but i dont now how to tell if the body is genuine gt does any one no wat the complience plate should say if it is gt?

any help would be greatly appreciated

slo is offline   Reply With Quote Multi-Quote with this Post
Old 25-02-2008, 09:10 PM   #2
Roy Rogers
Regular Member
 
Join Date: Aug 2007
Posts: 61
Default

What year model is it and tell me what is on the (complience / date of manufacture plate) just as a note it should have 78 in the serial prefix code either CK78 or CG78.
__________________
President
Small Ford Car Club of NSW
www.smallfordcarclubofnsw.com.au
Roy Rogers is offline   Reply With Quote Multi-Quote with this Post
Old 26-02-2008, 05:23 PM   #3
slo
Starter Motor
 
Join Date: Feb 2008
Posts: 15
Default cheers

thanks for the help champ

the complience plate goes like this

pefix SM SID ONO MOD
CK78JC 57803 321740 12538

FX

ITS 69 MODEL and i noticed serial number just above the complience plate abov the right hand wheel wich start with CN###### i didntt right the numbers down i forgot. that might help iduno
slo is offline   Reply With Quote Multi-Quote with this Post
Old 26-02-2008, 06:25 PM   #4
Roy Rogers
Regular Member
 
Join Date: Aug 2007
Posts: 61
Default

Thats a GT, September 69 from those numbers however the 12538 should be 12938. Being a 69 it has a date of manufacture plate on it not a comp plate it should be pop rivited to the inner guard the CK78JC number should be also stamped on the rad support panel (sometimes covered by the grill righthand side as your looking at it) the CN number is stamped around the strut tower and should be the same as the engine number. Give me the number and the letter at the end and I'll confirm it's a GT block. The 69's are crossover car they have the bits from the 67/68 and bits from the 70/71 a hassel to restore to original if you don't know what should be on or not. Where abouts are you from?
__________________
President
Small Ford Car Club of NSW
www.smallfordcarclubofnsw.com.au
Roy Rogers is offline   Reply With Quote Multi-Quote with this Post
Old 26-02-2008, 08:50 PM   #5
slo
Starter Motor
 
Join Date: Feb 2008
Posts: 15
Default

cool the comp plates a bit dirty so i probly wrote it down wrong
.i live at blacktown but the cars not here its at my buds house
i just gave him a call and he said the number under the exhaust on the block is N68IF6015DA

the strut num is CN7992B

he couldnt see the manufature plate il check tommorrow
does that mean its not a gt motor or its not the motor that come with the car or is my mate looking at the rong serial.yea the interior is different the gt dash is different to the ones on ebay u usually see

cheers mate Roy Rogers sounds like a famous singers name or somthing

Last edited by slo; 26-02-2008 at 08:55 PM.
slo is offline   Reply With Quote Multi-Quote with this Post
Old 26-02-2008, 09:29 PM   #6
Roy Rogers
Regular Member
 
Join Date: Aug 2007
Posts: 61
Default

With that CN number it confirms it was built at Homebush, I think he's looking at the wrong engine number. Give me a call on 0419 609 454 And I can tell you a bit more about the car and maybe you will be interested in joining our club. (if you can't get me on the phone just leave a message)
Roy Rogers its just something
__________________
President
Small Ford Car Club of NSW
www.smallfordcarclubofnsw.com.au
Roy Rogers is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2008, 02:22 PM   #7
slo
Starter Motor
 
Join Date: Feb 2008
Posts: 15
Default

i found the cn7992b number on the engine as onthe strut and the serial
near the grill matches the prefix num i cant find any other plate on it .
so it seems to all match up. i tried calling didnt leave amessage id like join the club the gt needs a bit of rust tacken out but ive got a 2door mk11 69 cortina as well to drive around while i fix my gt
ill try to put a pic up.
Attached Images
File Type: jpg car.jpg (105.7 KB, 60 views)
slo is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 01:05 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL