What tool is required to remove sway bar chassis mount - AU2 / 3

[cArSiK]

Hi Guys

As title says, what tool is used to remove the two mounts that hold the sway bar to the chassis?

We are talking about AU2/3 Falcon.

THanks in advance!

[bodes-sh]

**edited....

[JC]

They are a standard torx bit - size T-50, IIRC.

[cArSiK]

Thanks JC - I thought it was torx i just wasn't sure of the size. The car is at the spray painter at the moment so i couldn't check.

Thanks again.

[JC]

Originally Posted by cArSiK

Thanks JC - I thought it was torx i just wasn't sure of the size. The car is at the spray painter at the moment so i couldn't check.

Thanks again.

I'm not 100% on the size though, so don't thank me yet. It may be a T-35, not a T-50. I can confirm on Friday if you like.

[EvilChief]

some got tacked in there too .. :p

[cArSiK]

if you check that it would be great JC. The reason I ask is because my car is at the painters and i have to go to Pick and Pay less to get the mounts and i want to make sure I have the correct tools...

Cheers

[poolkeeper]

haha I just strip mounts from there a couple of days ago, from the new car lot.
Torx bit and a 14mm spanner I had to use.

[cArSiK]

^ cool do you remember the size torx?

[poolkeeper]

nar sorry, I just used one of the workers tools, watever fitted.