|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| Ford Performance Club of ACT Club Discussions General Chit and so forth! |
 |
|
|
Thread Tools | Display Modes |
23-04-2008, 08:51 PM
|
#1 | ||
|
Sly like a G6
Join Date: Jun 2006
Location: Hunter Valley Whine Country
Posts: 1,808
|
Can anyone recommend a workshop around Newy to:
1. Give an AU VCT head a mild port, polish and cleanup? 2. Fit a complete VCT engine (and loom, computer etc) as a conversion to an AU wagon? The old bus is starting to use oil after 330,000km, not a good thing as it's due to get a Raptor kit soon. So a freshen-up is in order, thought I'd go the VCT engine route as I can get a good low-k unit cheaper than a rebuild. If the Raptor doesn't eventuate I'll still have something a bit stronger than stock.
__________________
The Frankenfalcon... AU1.5 Wagon, BA brakes, AU2 booster, BA2 XR6T engine, stock from airbox to turbo, 8psi/98 octane tune 240RWKW, BF XR6T cat, quiet 3" zorst, Pex BSO660 & BSO439 mufflers, 84 db, built BTR box, 3.08 LSD, Emer SVI LPG, AU1 XR8 alloys, Momo wheel, JVC KDR746BT head unit, Aerpro steering wheel control wiring. Sleeper, anyone? |
||
|
|
|
24-04-2008, 08:48 AM
|
#2 | ||
|
Off tap Truckie
Join Date: Jun 2006
Location: Yarravel, NSW
Posts: 1,645
|
Try Ultrtune erina. just clink on my signature
__________________
T3 TS50 Brembo's,AFR 185,Platuim Rockers,Haltech,MSD,Custom exhaust
 : Another Power Installment Soon :1968 KC Bedford 1970 Mk1 Escort GT 1980 Mack Superliner 120t: Project Puppy Dog! AU2 XLS Cab Chassis, 5ltr, T3 Kit, Speedy Envy's 19x8.5 |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Workshop Recommendation Anyone?
Linear Mode
