|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-05-2008, 09:23 PM
|
#1 | ||
|
www.TUFFCARPARTS.com
Join Date: Feb 2006
Posts: 5,221
|
Hi All,
As the subject heading says, just wondering if anyone has an airbag tool lying around that they've used, and will never use again that they'd like to sell? None of my local places (Autobarn, Repco & Supercheap) stock it, so thought I'd ask here. Thanks, Justin. |
||
|
|
|
03-05-2008, 10:10 PM
|
#2 | ||
|
Now Fordless
Join Date: Aug 2005
Location: Fremantle, WA
Posts: 3,611
|
If its just a regular torx bit Repco should have it. I've got there set in my toolbox at work.
Any other tool place should be able to supply one. Even Bunnings might be the go. |
||
|
|
|
|
03-05-2008, 10:20 PM
|
#3 | ||
|
www.TUFFCARPARTS.com
Join Date: Feb 2006
Posts: 5,221
|
Nah, it's a 5 sided Torx bit, which nobody seems to carry!
|
||
|
|
|
|
03-05-2008, 10:33 PM
|
#4 | ||
|
quarter pane
Join Date: Mar 2008
Location: Walkerville SA
Posts: 43
|
If you meant the 2 security bolts on the side, drill the centre "pin" out with a carbon bit and tap a small 6 sided Torx bit into it to unscrew. They aren't in very tight and come out easily. Then replace them with some decent Allen bolts.
|
||
|
|
|
|
04-05-2008, 12:30 AM
|
#5 | ||
|
FG XR6 Ute & Sedan
 Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 23,524
|
This mob sell them for $16 each although they show a pic of a six point instaed of a 5 point. http://krewtools.com.au/index.php?
__________________
regards Blue |
||
|
|
|
|
04-05-2008, 10:10 AM
|
#6 | |||
|
FF.Com.Au Hardcore
Join Date: Apr 2005
Location: Moree, NSW
Posts: 2,076
|
I just put an order in at my local Repco for a set of bits, 67 bits, $40. It has the required TS-Plus bits. There from SP Tools
__________________
Nathan 2005 FPV BF Super Pursuit The new toy (now sold) The SP The old ute (sold) www.aufalcon.com/nc1183 Build Thread Quote:
|
|||
|
|
|
|
04-05-2008, 05:12 PM
|
#7 | ||
|
FF.Com.Au Hardcore
Join Date: Mar 2006
Posts: 581
|
Bursons supplied them off the shelf very cheap, and I dont know about them being loose mine were as tight as buggery
__________________
Can't beat a Windsor for sound and low down torque. Liquid Silver Pursuit250 Custom gear and diff ratios ECU Exhaust Crow Comp. Valve springs Adjust. Rollers Cold air |
||
|
|
|
|
04-05-2008, 07:43 PM
|
#8 | ||
|
MADED.6
Join Date: Jul 2005
Location: Werribee
Posts: 2,676
|
yeah bursons stock them justin.
cheers josh.
__________________
TUFAU-8 Get Stroked. AU Stroked 5.6L GHIA |
||
|
|
|
|
04-05-2008, 07:45 PM
|
#9 | ||
|
www.TUFFCARPARTS.com
Join Date: Feb 2006
Posts: 5,221
|
Thanks for the advice guys, Bursons it is!
Still, if anyone does have one that they'd like to sell, and they can post, let me know, so I can save a bit of time! Thanks, Justin. |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Anyone have a 5 sided Torx bit to remove an AU airbag that they'd like to sell?
Linear Mode
