Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 17-08-2008, 07:16 PM   #1
ayeyew
Teh Baest
 
ayeyew's Avatar
 
Join Date: Jan 2007
Location: Hills Area, NSW
Posts: 649
Default Do i need anything else to 'install' a pod filter?

Ok, well i have bought a pod filter and just haven't had time to get around to trying to put it in.

Before i put it in, i wanna make sure that all i need is the filter itself So i dont get agro

So, is there anything else i will need? I have an i6 with a 3 inch intake, standard airbox.

I've read through some of the threads, people have not mentioned anything else needed besides the pod (and perhaps cutting a corner off of the airbox), so yeah.. Just wanna make sure that i dont need any adaptors or whatnot

Cheers

__________________
1999 Liquid Silver AU
Show: XR6 Kit, Low, RDA Slotted's F&B, Fully Tabouli Sound System, Altezza Tailights (Good ones!)
Go: K&N Pod w/ 3" intake, XR6T Snorkel, Pacie Comp 4480's, 2.5" Cat Back, CMS Stg2 Cam, Custom Tune, Tranny Cooler

Coming..CMS Stg2A Cam, 68mm TB
Later.. 4.5L w/ BOOOOOOOOOOST or XR6T or AUIII XR8 220

Currently:
151kW (165 on other dynos )
ayeyew is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2008, 09:05 PM   #2
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default

you need an adaptor so the pod has smoething to connect to inside the box to hold it in place
__________________
2024 F150 XLT
b2tf is offline   Reply With Quote Multi-Quote with this Post
Old 18-08-2008, 10:31 AM   #3
XR6_4EVA
Hardcore I6 Enthusiast
 
XR6_4EVA's Avatar
 
Join Date: Jun 2008
Location: Melbourne
Posts: 438
Default

Could just remove the air box and slam the pod filter straight on, gives a great sound under load...

Takes in a bit of heat though...
__________________
2002 AU XR6 VCT III 'ST'
Liquid Silver
Auto

Full Momo and Leather Trim.
Redback exhaust, high flow cat and Pacey Extractors.

SELLING MY GENUINE 18" AZZUROS WITH TYRES.
FRONT TYRES 95%
REAR TYRES 50%
XR6_4EVA is offline   Reply With Quote Multi-Quote with this Post
Old 18-08-2008, 10:33 AM   #4
MrXr6Tickford
AU Club Mod
 
MrXr6Tickford's Avatar
 
Join Date: Mar 2008
Location: Albury
Posts: 409
Default

Quote:
Originally Posted by XR6_4EVA
Could just remove the air box and slam the pod filter straight on, gives a great sound under load...

Takes in a bit of heat though...

This would be a defect in NSW.
__________________
Interested in joining the Riverina Ford Owners Club?

Click Here
MrXr6Tickford is offline   Reply With Quote Multi-Quote with this Post
Old 18-08-2008, 12:49 PM   #5
JoesAu
...
 
JoesAu's Avatar
 
Join Date: Apr 2005
Location: Geelong
Posts: 1,407
Default

and not good for your motor haha
JoesAu is offline   Reply With Quote Multi-Quote with this Post
Old 18-08-2008, 02:14 PM   #6
Peuty
Afterburner + skids =
Donating Member1
 
Peuty's Avatar
 
Join Date: Dec 2004
Location: Skidsville
Posts: 12,125
Default

Quote:
Originally Posted by JoesAu
and not good for your motor haha
Won't hurt your motor at all, it's just a waste of time having it suck hot air.
__________________
Speed Kills. So buy an AU XR8 and live forever.

Oo\===/oO
Peuty is offline   Reply With Quote Multi-Quote with this Post
Old 18-08-2008, 02:45 PM   #7
BIGJB
FF.Com.Au Hardcore
 
BIGJB's Avatar
 
Join Date: May 2008
Posts: 1,536
Default

If it was me I'd shove it inside the front bar
if I was going to go to the trouble of taking out airbox.
Thus eliminating the issue of hot air that Daniel mentioned.
Not to mention it'll sound throaty as.
BIGJB is offline   Reply With Quote Multi-Quote with this Post
Old 18-08-2008, 09:41 PM   #8
fordman_01
DUB
 
Join Date: Nov 2007
Posts: 368
Default

haha yeh mine just sits there where the airbox used to be. you give it a bit and it screams. sounds soo lol
fordman_01 is offline   Reply With Quote Multi-Quote with this Post
Old 19-08-2008, 12:39 AM   #9
dreadly
Banned
 
Join Date: Sep 2007
Posts: 855
Default

Mate is this an impulse thing?
1. why bother firstly?
2. have ya done some research first? of course you need other things- adaptor for 1 some gaskets, bolts etc
3. There illegal- is it worth it if ya defected?
4.Why does everyone thinks pods make ya car go faster or something? lol
You'd be much better getting the following- A tickford au xr8 TE50 intake- ford might still have em or ebay? Also get a ba/bf xr6 turbo/typhoon intake and cut a hole in your air box behind your lights, and get a k&n panel filter ;) you see much better gains, and no dramas with the boys in blue- which is always a good thing?! i hope that helps?
dreadly is offline   Reply With Quote Multi-Quote with this Post
Old 19-08-2008, 07:51 AM   #10
Mont5.0
FF.Com.Au Hardcore
Donating Member3
 
Mont5.0's Avatar
 
Join Date: Nov 2007
Location: Riff
Posts: 12,388
Default

Quote:
Originally Posted by dreadly
Mate is this an impulse thing?
1. why bother firstly?
2. have ya done some research first? of course you need other things- adaptor for 1 some gaskets, bolts etc
3. There illegal- is it worth it if ya defected?
4.Why does everyone thinks pods make ya car go faster or something? lol
You'd be much better getting the following- A tickford au xr8 TE50 intake- ford might still have em or ebay? Also get a ba/bf xr6 turbo/typhoon intake and cut a hole in your air box behind your lights, and get a k&n panel filter ;) you see much better gains, and no dramas with the boys in blue- which is always a good thing?! i hope that helps?
Yes ford do still stock them, picked up a xr8/te50 large body snorkel from Thompson Ford Parramatta last week. cost me $38.00.
__________________
FGII XR6 IN LIGHTNING STRIKE
R52 SIII IN GUN METALLIC
Mont5.0 is offline   Reply With Quote Multi-Quote with this Post
Old 19-08-2008, 09:53 AM   #11
HLC
Audi S3
 
Join Date: May 2005
Location: Sydney.
Posts: 8,307
Default

Quote:
Originally Posted by Mont5.0
Yes ford do still stock them, picked up a xr8/te50 large body snorkel from Thompson Ford Parramatta last week. cost me $38.00.
really?!?! i went looking for one a couple of years ago and noone could find one. so i had to settle for a xr6t intake snorkel : no biggie its just a badge :P
__________________
HLC is offline   Reply With Quote Multi-Quote with this Post
Old 19-08-2008, 10:16 AM   #12
Mont5.0
FF.Com.Au Hardcore
Donating Member3
 
Mont5.0's Avatar
 
Join Date: Nov 2007
Location: Riff
Posts: 12,388
Default

mine is the same dimensions but no badge, so its an xr not TE either way much bigger than old one.
__________________
FGII XR6 IN LIGHTNING STRIKE
R52 SIII IN GUN METALLIC
Mont5.0 is offline   Reply With Quote Multi-Quote with this Post
Old 19-08-2008, 10:20 AM   #13
HLC
Audi S3
 
Join Date: May 2005
Location: Sydney.
Posts: 8,307
Default

yeah its an xr6t one then. carry over part.
__________________
HLC is offline   Reply With Quote Multi-Quote with this Post
Old 19-08-2008, 01:22 PM   #14
teabags2
Bob
 
Join Date: Apr 2006
Location: Adelaide
Posts: 344
Default

Isn't the BA one the same less the badges? That is what I used. it was easy to get hold off.

Bob
teabags2 is offline   Reply With Quote Multi-Quote with this Post
Old 19-08-2008, 01:27 PM   #15
Peuty
Afterburner + skids =
Donating Member1
 
Peuty's Avatar
 
Join Date: Dec 2004
Location: Skidsville
Posts: 12,125
Default

Quote:
Originally Posted by dreadly
Mate is this an impulse thing?
1. why bother firstly?
2. have ya done some research first? of course you need other things- adaptor for 1 some gaskets, bolts etc
3. There illegal- is it worth it if ya defected?
4.Why does everyone thinks pods make ya car go faster or something? lol
You'd be much better getting the following- A tickford au xr8 TE50 intake- ford might still have em or ebay? Also get a ba/bf xr6 turbo/typhoon intake and cut a hole in your air box behind your lights, and get a k&n panel filter ;) you see much better gains, and no dramas with the boys in blue- which is always a good thing?! i hope that helps?
Are you drunk?

Why bother? Cos he want's to.
Since when are they illegal? What he is asking is perfectly within the confines of the law.
A Tickford AU XR8 TE50 intake. What is that? You mean a Tickford snorkel? If so, you actually mean a BA XR6T snorkel. And whats that got to do with what filter you use?
__________________
Speed Kills. So buy an AU XR8 and live forever.

Oo\===/oO
Peuty is offline   Reply With Quote Multi-Quote with this Post
Old 19-08-2008, 05:21 PM   #16
ayeyew
Teh Baest
 
ayeyew's Avatar
 
Join Date: Jan 2007
Location: Hills Area, NSW
Posts: 649
Default

Quote:
Originally Posted by dreadly
Mate is this an impulse thing?
1. why bother firstly?
2. have ya done some research first? of course you need other things- adaptor for 1 some gaskets, bolts etc
3. There illegal- is it worth it if ya defected?
4.Why does everyone thinks pods make ya car go faster or something? lol
You'd be much better getting the following- A tickford au xr8 TE50 intake- ford might still have em or ebay? Also get a ba/bf xr6 turbo/typhoon intake and cut a hole in your air box behind your lights, and get a k&n panel filter ;) you see much better gains, and no dramas with the boys in blue- which is always a good thing?! i hope that helps?
1. Well i have a pod filter sitting in my room.. So i figure why not

2. This is my research

3. Illegal? I am not going to have an exposed pod filter, i am going to have a pod filter inside the standard airbox, which is very legal indeed

4. I already have the XR6T snorkel and a K&N panel filter

Cool? Thx
__________________
1999 Liquid Silver AU
Show: XR6 Kit, Low, RDA Slotted's F&B, Fully Tabouli Sound System, Altezza Tailights (Good ones!)
Go: K&N Pod w/ 3" intake, XR6T Snorkel, Pacie Comp 4480's, 2.5" Cat Back, CMS Stg2 Cam, Custom Tune, Tranny Cooler

Coming..CMS Stg2A Cam, 68mm TB
Later.. 4.5L w/ BOOOOOOOOOOST or XR6T or AUIII XR8 220

Currently:
151kW (165 on other dynos )
ayeyew is offline   Reply With Quote Multi-Quote with this Post
Old 19-08-2008, 07:25 PM   #17
SIKSIX
Its gone V
 
SIKSIX's Avatar
 
Join Date: Sep 2005
Posts: 359
Default

ayeyou, This is an engineers drawing of my intake setup : , i am running a custom 3" pipe. When running into the airbox i just removed the standard rubber 'thingie' (but can't remember if it was an ef box lid) with the four bolts and had just enough room to fit the three inch pipe into which now my pod connects directly to. any questions about the drawing feel free to ask.

SIKSIX is offline   Reply With Quote Multi-Quote with this Post
Old 21-08-2008, 12:47 PM   #18
JoesAu
...
 
JoesAu's Avatar
 
Join Date: Apr 2005
Location: Geelong
Posts: 1,407
Default

Quote:
Originally Posted by Peuty
Won't hurt your motor at all, it's just a waste of time having it suck hot air.
yer i know that but it will the hurt the performance of your car thats for sure
JoesAu is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 02:19 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL