|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-12-2008, 11:07 PM
|
#1 | ||
|
Starter Motor
Join Date: Dec 2008
Posts: 2
|
Gday Everyone,
I have a MK1 2door escort that is have recently put a standard 2l pinto into. I was wondering what kind of power people have been generating for what cost? I have a cam kit with a mild cam and double valve springs to go in my other motor. I have heard that the spray bar is the weak point at high rpm, is there any way around this? Also looking for some small parts like an indicator stalk with the auto return ring and headlight switch? Thanks Scott |
||
|
|
|
08-12-2008, 11:22 PM
|
#2 | ||
|
Perth XR5'er
Join Date: Jul 2006
Location: Perth
Posts: 254
|
I have 126 rwhp for a sum of $10,000+.
EASY WAY TO GET AROUND THE SPRAY BAR OPTION IS TO GET A RIFLED CAM, WHERE THE OIL SPRAYS OUT OF THE CAM WHICH NEGATES THE SPRAY BAR...
__________________
Ford Rallye Sport Club of WA; Member#64: Barbagallo Short: 1:01.1779 Barbagallo Long: 1:12.4649 Collie: 55.90 K&N Gen2 57i CAI / 2XS RIP / Airtec Gen3 IC / Mongoose Dump Pipe / Outlaw 200cpsi Cat / Milltek Ultimate Race Catback / Whiteline 24mm RARB / Whiteline FALK / BC Racing BR-Spec Coilovers / RSR Rear Camber Arms / Ferodo DS2500 Pads F&R / Goodridge Braided Brake Lines / Elevate Torque Mount / DS MOD C / MkII RS Clutch & DMF / Quaife LSD |
||
|
|
|
|
09-12-2008, 03:58 PM
|
#3 | ||
|
Starter Motor
Join Date: Dec 2008
Posts: 2
|
What kind of mods have you done to get that figure and what is it at the fly?
|
||
|
|
|
|
09-12-2008, 09:40 PM
|
#4 | ||
|
Perth XR5'er
Join Date: Jul 2006
Location: Perth
Posts: 254
|
Engine:
Big Vv head Full port and Polish RL32 cam Double vavle springs Fully Balanced internals ARP rod bolts Shotpened and balanced Sierra rods Sierra EFI Wolf 3D Version 4 Bosch 775 Injectors 4.5kg Lightened Flywheel 10.5:1 Compression Cold Air Induction Extractors 4-2-1 HPC coated 2.5"straight thru exhaust 11 row oil cooler That's about 170bhp at the flywheel.
__________________
Ford Rallye Sport Club of WA; Member#64: Barbagallo Short: 1:01.1779 Barbagallo Long: 1:12.4649 Collie: 55.90 K&N Gen2 57i CAI / 2XS RIP / Airtec Gen3 IC / Mongoose Dump Pipe / Outlaw 200cpsi Cat / Milltek Ultimate Race Catback / Whiteline 24mm RARB / Whiteline FALK / BC Racing BR-Spec Coilovers / RSR Rear Camber Arms / Ferodo DS2500 Pads F&R / Goodridge Braided Brake Lines / Elevate Torque Mount / DS MOD C / MkII RS Clutch & DMF / Quaife LSD |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Pinto Mods
Linear Mode
