|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
21-06-2009, 07:50 PM | #1 | ||
All Bran = Regular Member
Join Date: Feb 2006
Location: BrizVegas
Posts: 1,970
|
My alternator has been charging only intermittently for most of last week and I had it in mind to get brushes/rectifier/bearings and sort it out.
Anyhoo, as often happens the week got away so I decided on Friday night to pull it out and get my wife to pick me up an exchange unit from the auto electrician on Sat morning (I work Sat mornings). When I removed the belt cover it was obvious that power steering fluid had been leaking on and into the alternator, although not a big enough leak to drip onto the ground. After removing the alternator and to save my wife getting oil and gunk on her and/or her car I thought it would be a good idea to clean it up a bit. So I dutifully sprayed a full can of degreaser onto, into and generally all over the alternator. I let it sit for a bit and then got the high pressure cleaner on to the job. Believe me, that thing got a severe washing! I blew it out with compressed air and left it at that. Who's have thought that auto 'leccies don't work Sat mornings any more? Not one in our general area was at work! Bugger... wait till Monday....but I had a trailer load of stuff to take to the tip with my new towbar. Oh well, only half an hour to reinstall the alternator, which I did. Hooked the trailer up and was surprised that the alternator was charging.... but fully expected it to to cut in and out as it had been doing. Nope, didn't miss a beat going to the tip. We went out on Sat night and I thought that loading it up (lights/aircon etc) would be a pretty good test. Again, didn't miss a beat. Today we went up to the Sunshine Coast. Still going strong. My advice is that if your alternator is playing up, drown it... it will love you forever |
||
23-06-2009, 01:28 PM | #2 | ||
Irregular member
Join Date: Dec 2004
Location: Melbourne
Posts: 3,941
|
Thanks for the advice mate, I definitely should do that with mine. It's got mess all over it.
__________________
2000 AU II FAIRLANE 75th ANNIVERSARY - big and shiny My hovercraft is full of eels! Movie Car Chase of the Week: Gene Hackman driving a 1971 Pontiac LeMans to chase an elevated train in The French Connection (1971). |
||
23-06-2009, 01:43 PM | #3 | |||
All Bran = Regular Member
Join Date: Feb 2006
Location: BrizVegas
Posts: 1,970
|
Quote:
The drip of power steering fluid combined with travelling on dirt roads meant that the finning and most orifices (of the alternator) were pretty well blocked. If you give it a wash make sure that you give it a good blow out with compressed air. In fact, if it's gunked up, I'd blow it out first. I only gave mine a bath because I'd planned on replacing it the day after |
|||
23-06-2009, 03:37 PM | #4 | ||
Sales Representative
Join Date: Mar 2007
Location: Young
Posts: 5,314
|
LMAO! what a funny circumstance! :P
__________________
Project InfernoSR - Back Burner Project FeralTerra - No longer Project Fairmont Prodigy - Sold Thanks go to: MY WIFE! Bathurst Brakepro Undacar eBay!! |
||
24-06-2009, 08:45 AM | #5 | ||
With da Warlords
Join Date: May 2006
Location: Orange NSW
Posts: 1,781
|
Lol. I done a similiar thing.
When I polished my alternator and the bracket, it got covered in filings, and fine metal flakes etc. It was really dirty and I figured an alternator, might not like foreign metal etc in there much. So I washed it out with a whole can of electrical contact cleaner (it evaporates) let it dry, then blew the remaining stuff out with compressed air. Worked a treat, and I've never had a problem in the last year. :-)
__________________
You don't have to be faster than the bear, you just have to be faster than the slowest guy running from the bear. For Sale: Parachute. Only used once, never opened, small stain. Windsor Warlords AU III XR-8220 300+ rwhp of Manual fun XR50T Ute - 300rwkw (give or take depending on the day)
|
||
24-06-2009, 10:04 PM | #6 | ||
Donating Member
Join Date: Dec 2006
Posts: 5,545
|
Fix your power steering next weekend then!! LOL
They do not like PS oil, even if it still works the oil/dust will wear out the bearings/brushes/comutator quicker Ford should put a cover over the dam thing as PS leaks are very common. |
||
Thread Tools | |
Display Modes | |
|