Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 07-12-2009, 09:38 AM   #1
old fordnut
too many fords
 
old fordnut's Avatar
 
Join Date: Jun 2005
Location: Berwick, Vic
Posts: 897
Default power steering rack

I've got a split boot on my steering rack thats leaking oil. Does this mean that the seal on the steering rod is leaking? can just replace seal or do I need new rack?
Also whats the torque spec for the lower balljoints?

__________________
Daily driver 1: [COLOR=Indigo] 2010 FG XR6 Turbo 50th Anniversary, BPR CAI, Plazmaman turbo pipe.

Daily driver 2: Nissan gq patrol

Project 1: XP ute, 351W, c4, 9inch

Project 2: XBGS sedan, sunburnt orange and vinyl, original 4spd, 302C.

Last edited by old fordnut; 07-12-2009 at 09:44 AM. Reason: add question
old fordnut is offline   Reply With Quote Multi-Quote with this Post
Old 07-12-2009, 09:53 AM   #2
old fordnut
too many fords
 
old fordnut's Avatar
 
Join Date: Jun 2005
Location: Berwick, Vic
Posts: 897
Default

Aslo does anybody know where I xcan get a good price on either a s/h or reconditioned Rad?
__________________
Daily driver 1: [COLOR=Indigo] 2010 FG XR6 Turbo 50th Anniversary, BPR CAI, Plazmaman turbo pipe.

Daily driver 2: Nissan gq patrol

Project 1: XP ute, 351W, c4, 9inch

Project 2: XBGS sedan, sunburnt orange and vinyl, original 4spd, 302C.
old fordnut is offline   Reply With Quote Multi-Quote with this Post
Old 07-12-2009, 01:43 PM   #3
InfernoSR
Sales Representative
 
InfernoSR's Avatar
 
Join Date: Mar 2007
Location: Young
Posts: 5,314
Technical Contributor: For members who share their technical expertise. - Issue reason: For research and posted write up on cooling system care and repair in AU.COM and offering help where possible 
Default

if this is for your AU XR8, i wouldnt bother with stock radiators let alone 2nd hand/reco (unless young core)... i just upgraded mine to the best off the shelf complete ADRAD radiator you can get... around $350-$400 for a wide 2 row brass unit...
__________________
InfernoSR is offline   Reply With Quote Multi-Quote with this Post
Old 07-12-2009, 06:14 PM   #4
svo supporter
Fixing Ford's **** ups
 
svo supporter's Avatar
 
Join Date: Feb 2009
Location: In a house
Posts: 4,759
Default

Firstly the rack. If it's leaking, replace it. 2ndly. The balljoint tightening spec. I tighten them up as tight as humanly possible by hand. Never had a nut come off yet.

Hope that answers your questions satisfacturily
svo supporter is offline   Reply With Quote Multi-Quote with this Post
Old 09-12-2009, 04:57 PM   #5
old fordnut
too many fords
 
old fordnut's Avatar
 
Join Date: Jun 2005
Location: Berwick, Vic
Posts: 897
Default

Quote:
Originally Posted by svo supporter
Firstly the rack. If it's leaking, replace it. 2ndly. The balljoint tightening spec. I tighten them up as tight as humanly possible by hand. Never had a nut come off yet.

Hope that answers your questions satisfacturily
yep thx
__________________
Daily driver 1: [COLOR=Indigo] 2010 FG XR6 Turbo 50th Anniversary, BPR CAI, Plazmaman turbo pipe.

Daily driver 2: Nissan gq patrol

Project 1: XP ute, 351W, c4, 9inch

Project 2: XBGS sedan, sunburnt orange and vinyl, original 4spd, 302C.
old fordnut is offline   Reply With Quote Multi-Quote with this Post
Old 09-12-2009, 04:58 PM   #6
old fordnut
too many fords
 
old fordnut's Avatar
 
Join Date: Jun 2005
Location: Berwick, Vic
Posts: 897
Default

Quote:
Originally Posted by InfernoSR
if this is for your AU XR8, i wouldnt bother with stock radiators let alone 2nd hand/reco (unless young core)... i just upgraded mine to the best off the shelf complete ADRAD radiator you can get... around $350-$400 for a wide 2 row brass unit...

Unfortunately I cant afford that much and I'm desperate as this is the family car and we need it.
__________________
Daily driver 1: [COLOR=Indigo] 2010 FG XR6 Turbo 50th Anniversary, BPR CAI, Plazmaman turbo pipe.

Daily driver 2: Nissan gq patrol

Project 1: XP ute, 351W, c4, 9inch

Project 2: XBGS sedan, sunburnt orange and vinyl, original 4spd, 302C.
old fordnut is offline   Reply With Quote Multi-Quote with this Post
Old 09-12-2009, 09:56 PM   #7
blownv8au
Pro Street Au Ute
 
blownv8au's Avatar
 
Join Date: Apr 2008
Location: Rocky QLD
Posts: 1,150
Default

Quote:
Originally Posted by old fordnut
Unfortunately I cant afford that much and I'm desperate as this is the family car and we need it.
i had overheating probs with the alloy radiator and it had some holes in it. so i got a brand new copper core one off ebay was around $200 delivered. its been in the car for about 12 months now and still working great hasn't overheated again, absolute bargain. by the way i give my car a hard time more often than not and its always bloody hot up here so i won't be forking out big dollars for one the ebay cheapys great.
blownv8au is offline   Reply With Quote Multi-Quote with this Post
Old 10-12-2009, 08:59 AM   #8
whiskers
gone fishing
 
whiskers's Avatar
 
Join Date: Jul 2006
Location: Morayfield qld
Posts: 286
Default

have a look in here for your torque specs http://www.fordforums.com.au/vbporta...article&id=578
__________________
Cheers
Whiskers
whiskers is offline   Reply With Quote Multi-Quote with this Post
Old 10-12-2009, 05:22 PM   #9
old fordnut
too many fords
 
old fordnut's Avatar
 
Join Date: Jun 2005
Location: Berwick, Vic
Posts: 897
Default

Nothing in that link
__________________
Daily driver 1: [COLOR=Indigo] 2010 FG XR6 Turbo 50th Anniversary, BPR CAI, Plazmaman turbo pipe.

Daily driver 2: Nissan gq patrol

Project 1: XP ute, 351W, c4, 9inch

Project 2: XBGS sedan, sunburnt orange and vinyl, original 4spd, 302C.
old fordnut is offline   Reply With Quote Multi-Quote with this Post
Old 10-12-2009, 05:59 PM   #10
mik
FF.Com.Au Hardcore
 
mik's Avatar
 
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
Default

http://cgi.ebay.com.au/NEW-REP-RADIA...item5636f6c94f
here`s a cheap radiator, if thats a problem , try a bottle of wynns radiator stop leak (had the stuff in for 12 months ) , i put some of this stuff in my mums old beat up blue bird with a dodgy radiator , small leak fixed, my young brother then went an rear ended another car, radiator bent around fan blades .........no leaks amazeing stuff, bayfords in coburg have a power steering /auto section and do reco racks for a reasonable price i think, spare parts 0392975000, have a ring around....... you`ll need an alignment with a reco rack.
mik is offline   Reply With Quote Multi-Quote with this Post
Old 11-12-2009, 07:36 AM   #11
White_sr_taxi
Regular Member
 
Join Date: Mar 2009
Location: Hobart, TAS
Posts: 149
Default

don't mean to thread hijack but shouldn;t you mix copper core rad with alloy head? or somthing along those lines? was speaking to my mechanic yesterday as my rad died three days ago and id be interested if this was the case.
White_sr_taxi is offline   Reply With Quote Multi-Quote with this Post
Old 11-12-2009, 05:38 PM   #12
lofty
Rusticating
 
lofty's Avatar
 
Join Date: Mar 2009
Location: Lower Lakes, SA
Posts: 541
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Excellent article on AU Power window installation. 
Default

Re steering racks. I've seen several people on the forums say 'if it leaks, replace it', without giving reasons. Mine leaks and I asked a local mechanic about it today. He said they often leak a bit and it doesn't really matter. It's not going to fail or do anything dangerous. He said if it leaks onto the ground or you're losing a lot of fluid you might want to replace it. Neither is true in my case so it can wait. But if I had a split boot I might think differently cos I drive on dirt roads.
__________________

Territory SYII RWD, BFII RTV tray
lofty is offline   Reply With Quote Multi-Quote with this Post
Old 11-12-2009, 05:58 PM   #13
frd906
FF.Com.Au Hardcore
 
Join Date: Apr 2009
Location: jimboomba
Posts: 4,638
Default

i just picked up a very good condition steering rack from a au series 1 for 50 bucks no leaks or anything, still look brand new and the car has under 100 thou on the clock
__________________
Welder/Fabricator at Beaudesert Exhuast

Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
frd906 is offline   Reply With Quote Multi-Quote with this Post
Old 11-12-2009, 06:33 PM   #14
svo supporter
Fixing Ford's **** ups
 
svo supporter's Avatar
 
Join Date: Feb 2009
Location: In a house
Posts: 4,759
Default

Quote:
Originally Posted by lofty
Re steering racks. I've seen several people on the forums say 'if it leaks, replace it', without giving reasons. Mine leaks and I asked a local mechanic about it today. He said they often leak a bit and it doesn't really matter. It's not going to fail or do anything dangerous .

Here's part of the reason behind replacing a leaking steering rack. It means the seals inside the racks are starting to perish. Eventually they'll give up the ghost totally, which means you'll be left with a manual steering power rack.

The racks can fail, if the fluid isn't kept upto them. Once they fail due to constant lack of fluid, it becomes pricey, because old racks can't be sent back for re-conditioning. So, the end result is, you pay for it.

As for them leaking a little bit. If that was the case, I'd come home drenched in power steering fluid. The rack boots aren't "fluid" tight. You can get a small flat bladed screw driver between the end of the boot and the rackend, which means, that's where this "leaking" fluid would exit, if racks were constantly leaking, as your mechanic eluded to.

Hope that clarifies a little bit
svo supporter is offline   Reply With Quote Multi-Quote with this Post
Old 11-12-2009, 07:32 PM   #15
lofty
Rusticating
 
lofty's Avatar
 
Join Date: Mar 2009
Location: Lower Lakes, SA
Posts: 541
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Excellent article on AU Power window installation. 
Default

svo, I'm with you for the first 2 paragraphs, but the third I don't understand at all.
__________________

Territory SYII RWD, BFII RTV tray
lofty is offline   Reply With Quote Multi-Quote with this Post
Old 11-12-2009, 10:43 PM   #16
svo supporter
Fixing Ford's **** ups
 
svo supporter's Avatar
 
Join Date: Feb 2009
Location: In a house
Posts: 4,759
Default

Quote:
Originally Posted by lofty
svo, I'm with you for the first 2 paragraphs, but the third I don't understand at all.

I'll try and explain it a bit better then

The place a steering rack can leak fluid out of is the connections from the pump or the rack boots.

The rack boots firstly. They're held with either a plastic clamp or a zippy tie, to help all the road crap to stay out. There is one at the end of the rack nearest the body of the rack and one near the tierod side of the rackend.

If a rack was to leak a little, as your mechanic is saying, you'd see signs of it in those spots.

My comments about me being drenched. I do alot of wheel alignments in a day. If power steering racks do leak, as your mechanic has stated, I'd come home drenched in power steering fluid, as I'm around these areas that a rack would leak from. Instead, I just come home covered in engine oil and road grime.

I hope that clarifies things a little better for you
svo supporter is offline   Reply With Quote Multi-Quote with this Post
Old 11-12-2009, 10:44 PM   #17
svo supporter
Fixing Ford's **** ups
 
svo supporter's Avatar
 
Join Date: Feb 2009
Location: In a house
Posts: 4,759
Default

Quote:
Originally Posted by lofty
svo, I'm with you for the first 2 paragraphs, but the third I don't understand at all.

I'll try and explain it a bit better then

The place a steering rack can leak fluid out of is the connections from the pump or the rack boots.

The rack boots firstly. They're held with either a plastic clamp or a zippy tie, to help all the road crap to stay out. There is one at the end of the rack nearest the body of the rack and one near the tierod side of the rackend.

If a rack was to leak a little, as your mechanic is saying, you'd see signs of it in those spots. However I don't see it a lot.

My comments about me being drenched. I do alot of wheel alignments in a day. If power steering racks do leak, as your mechanic has stated, I'd come home drenched in power steering fluid, as I'm around these areas that a rack would leak from. Instead, I just come home covered in engine oil and road grime.

I hope that clarifies things a little better for you
svo supporter is offline   Reply With Quote Multi-Quote with this Post
Old 11-12-2009, 11:18 PM   #18
blownv8au
Pro Street Au Ute
 
blownv8au's Avatar
 
Join Date: Apr 2008
Location: Rocky QLD
Posts: 1,150
Default

Quote:
Originally Posted by White_sr_taxi
don't mean to thread hijack but shouldn;t you mix copper core rad with alloy head? or somthing along those lines? was speaking to my mechanic yesterday as my rad died three days ago and id be interested if this was the case.
i assumed it was for his xr8? and xd xe and xf all had alloy heads (6cyl) and copper rads, its the first i've heard of that let us know if you find more info.
blownv8au is offline   Reply With Quote Multi-Quote with this Post
Old 11-12-2009, 11:37 PM   #19
fernsantos
Regular Member
 
Join Date: Jan 2007
Posts: 118
Default

My steering rack was leaking from the drivers side boot.
The boot was split and because i could not afford the rack at the moment i got the split boot replaced for $70.
I keep an eye on the power steering fluid all the time and i know it as a very small leak when it starts getting worst i will replace the rack then it costs $370 for a reco rack installed .
fernsantos is offline   Reply With Quote Multi-Quote with this Post
Old 12-12-2009, 12:08 AM   #20
Mr Hardware
Flairs - Truckers Delight
 
Mr Hardware's Avatar
 
Join Date: Aug 2006
Location: Brisbane Northside Likes: Opposite Lock
Posts: 5,731
Tech Writer: Recognition for the technical writers of AFF - Issue reason: The excellent how to on LPG jet cleaning. 
Default

lofty i'd be finding a new mechanic
a leaking rack will only get worse and fail at the least opportune time.
In my experience once a rack decides to lose any fluid at all its rebuild time. Cheap insurance!
__________________
Current: Silhouette Black 2007 SY Ford Territory TX RWD 7-seater "Black Banger"
2006-2016: Regency Red 2000 AUII Ford Falcon Forte Automatic Sedan Tickford LPG "Millennium Falcon"
Mr Hardware is offline   Reply With Quote Multi-Quote with this Post
Old 12-12-2009, 12:23 AM   #21
frd906
FF.Com.Au Hardcore
 
Join Date: Apr 2009
Location: jimboomba
Posts: 4,638
Default

thats why i am replacing mine before i make the trip in jan, if i dont have no work then, to stanphorpe, i picked one up today, well getting it after xmas for 50 bucks very good condition no leaks
__________________
Welder/Fabricator at Beaudesert Exhuast

Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
frd906 is offline   Reply With Quote Multi-Quote with this Post
Old 12-12-2009, 07:53 AM   #22
lofty
Rusticating
 
lofty's Avatar
 
Join Date: Mar 2009
Location: Lower Lakes, SA
Posts: 541
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Excellent article on AU Power window installation. 
Default

Quote:
Originally Posted by svo supporter
If a rack was to leak a little, as your mechanic is saying, you'd see signs of it in those spots. However I don't see it a lot.
Ok so that was a convoluted way of saying leaks are not common in your experience. Fair enough.

Quote:
Originally Posted by Mr Hardware
... a leaking rack will only get worse and fail at the least opportune time.
Mr Hardware would you please define 'fail'?
__________________

Territory SYII RWD, BFII RTV tray
lofty is offline   Reply With Quote Multi-Quote with this Post
Old 12-12-2009, 09:12 AM   #23
svo supporter
Fixing Ford's **** ups
 
svo supporter's Avatar
 
Join Date: Feb 2009
Location: In a house
Posts: 4,759
Default

I think Mr Hardware is saying it'll stop becoming a power steering rack and become a manual steering rack at the most inconvenient time. Like when you're pulling into a car park or your driveway. Or even worst still, when you're miles away from home.
svo supporter is offline   Reply With Quote Multi-Quote with this Post
Old 12-12-2009, 11:35 AM   #24
dagger1975
Starter Motor
 
Join Date: Dec 2009
Posts: 1
Default help

i have an au1 xr8 and the rack is leaking and i want to replace it can anyone tell me if the racks are the same as a 6 please help
dagger1975 is offline   Reply With Quote Multi-Quote with this Post
Old 12-12-2009, 11:44 AM   #25
Mr Hardware
Flairs - Truckers Delight
 
Mr Hardware's Avatar
 
Join Date: Aug 2006
Location: Brisbane Northside Likes: Opposite Lock
Posts: 5,731
Tech Writer: Recognition for the technical writers of AFF - Issue reason: The excellent how to on LPG jet cleaning. 
Default

Quote:
Originally Posted by svo supporter
I think Mr Hardware is saying it'll stop becoming a power steering rack and become a manual steering rack at the most inconvenient time. Like when you're pulling into a car park or your driveway. Or even worst still, when you're miles away from home.
Yup, spot on.
__________________
Current: Silhouette Black 2007 SY Ford Territory TX RWD 7-seater "Black Banger"
2006-2016: Regency Red 2000 AUII Ford Falcon Forte Automatic Sedan Tickford LPG "Millennium Falcon"
Mr Hardware is offline   Reply With Quote Multi-Quote with this Post
Old 12-12-2009, 11:50 AM   #26
bodes-sh
FF.Com.Au Hardcore
 
Join Date: May 2006
Location: Perth, South
Posts: 3,064
Default

Quote:
Originally Posted by svo supporter
I think Mr Hardware is saying it'll stop becoming a power steering rack and become a manual steering rack at the most inconvenient time. Like when you're pulling into a car park or your driveway. Or even worst still, when you're miles away from home.
not to mention burning the pump out from running it with no fluid until you get the rack replaced...obviously depending on how far you are from a mechanic...
bodes-sh is offline   Reply With Quote Multi-Quote with this Post
Old 12-12-2009, 07:15 PM   #27
mik
FF.Com.Au Hardcore
 
mik's Avatar
 
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
Default

yes the rack boot is only a dust cover and should not have oil inside it.
mik is offline   Reply With Quote Multi-Quote with this Post
Old 12-12-2009, 08:46 PM   #28
old fordnut
too many fords
 
old fordnut's Avatar
 
Join Date: Jun 2005
Location: Berwick, Vic
Posts: 897
Default

Alright. I got a rad form FTG as they were the only ones around that had them to suit. Will be lookinbg for a replacement steering rack sometime next week.
__________________
Daily driver 1: [COLOR=Indigo] 2010 FG XR6 Turbo 50th Anniversary, BPR CAI, Plazmaman turbo pipe.

Daily driver 2: Nissan gq patrol

Project 1: XP ute, 351W, c4, 9inch

Project 2: XBGS sedan, sunburnt orange and vinyl, original 4spd, 302C.
old fordnut is offline   Reply With Quote Multi-Quote with this Post
Old 26-12-2009, 06:30 PM   #29
Crazy Dazz
FF.Com.Au Hardcore
 
Join Date: Feb 2008
Location: Perth, Northern Suburbs
Posts: 5,011
Default

Our AU sedan is consuming fluid at an alarming rate. Whilst there are obvious traces down under, there are no visible leaks at idle, so I can only assume that it’s leaking at high revs or when cornering. At this point, I can’t tell where it’s coming from. Is it likely to be a fitting or something else easily fixed?
Or am I up for a rebuilt rack assembly?
Crazy Dazz is offline   Reply With Quote Multi-Quote with this Post
Old 26-12-2009, 06:54 PM   #30
urbancowboy
Regular Member
 
Join Date: Aug 2009
Location: Newcastle
Posts: 474
Default

RE: steering racks,

Replace it! as has been previously stated it is cheap insurance! They are a exchange item, no matter where you get it from! they don't make NEW ones anymore, Go to repco they are your cheapest option. I recently replaced mine, i work for Ford spare parts and the Repco one was cheaper than getting the Ford one even at staff price!
urbancowboy is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 10:25 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL