|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
23-06-2010, 10:07 PM | #1 | ||
Regular Member
Join Date: Jun 2010
Location: melb , vic
Posts: 392
|
im having trouble starting my s/3 au after it has reached operating temp , if i shut it down , then try to start again it turns over but wont fire , if i turn ign off and try again it usally fires , but i smell unburnt fuel , its like and old car with the timing out of wack, can the timing be adjusted some how, been told to ground the the pins in the diagnostic port to set the base idle , but with no dizzy , what do you move to adjust timing advance or retard.
|
||
23-06-2010, 10:13 PM | #2 | ||
Lost Boost Gained Class
Join Date: Jun 2008
Location: Werribee, Melbourne
Posts: 2,763
|
when was the last time the plugs, leads, coil pack where changed??
__________________
2006 BF Fairmont Ghia
2001 AU Falcon |
||
23-06-2010, 10:37 PM | #3 | ||
Regular Member
Join Date: Jun 2010
Location: melb , vic
Posts: 392
|
it has new plugs , leads, injectors & fuel rail , fuel filter , and pump is 18months old, coil pack is the original.
|
||
27-06-2010, 10:01 PM | #4 | ||
The only thing u'll see!!
Join Date: Mar 2010
Location: Brisbane QLD
Posts: 498
|
Crank angle sensor. My daily did the exact same thing 6 months ago. Was hard to start warm, then one day at the shops wouldn't start at all. Easily checked with a scan tool, check wave length for crank sensor, cam sensor, and map sensor. Good luck.
|
||
27-06-2010, 11:08 PM | #5 | ||
Regular Member
Join Date: Jun 2010
Location: melb , vic
Posts: 392
|
who do i take it to , to check with scan tool , cost much ? thanks, did your fuel eco suffer whilst you had the same prob.
__________________
IF YOU CANT FIX IT WITH A SCREWDRIVER OR SHIFTER , F%$K IT with a hammer - Light travels faster than sound.......this is why some people appear bright until you hear them speak! AU SERIES 3 LIQUID SILVER BBS MOTORSPORT RIMS , EIBACHS , BILSTEINS , CERAMIC COATED 4499 PACIE'S , 2.5 S/S GENIE SYSTEM , MAGNAFLOWS , METALCAT 200cpsi , CAI MODS 123.4 GROUND TEARING RWKW'S , LOL |
||
28-06-2010, 08:46 AM | #6 | ||
Flairs - Truckers Delight
Join Date: Aug 2006
Location: Brisbane Northside Likes: Opposite Lock
Posts: 5,731
|
you take it to a mechanic with a scan tool. nearly all of your local servo mechanics should have one by now.
__________________
Current: Silhouette Black 2007 SY Ford Territory TX RWD 7-seater "Black Banger"
2006-2016: Regency Red 2000 AUII Ford Falcon Forte Automatic Sedan Tickford LPG "Millennium Falcon" |
||
28-06-2010, 09:39 AM | #7 | |||
FF.Com.Au Hardcore
Join Date: Apr 2005
Location: Moree, NSW
Posts: 2,076
|
I'd be changing the coil pack. They sit under the inlet manifold and do get affected by heat. Will probably solve your fuel economy issues too.
__________________
Nathan 2005 FPV BF Super Pursuit The new toy (now sold) The SP The old ute (sold) www.aufalcon.com/nc1183 Build Thread Quote:
|
|||
28-06-2010, 11:18 AM | #8 | ||
Regular Member
Join Date: Jun 2010
Location: melb , vic
Posts: 392
|
coils either work or they dont ? from what i've read , but saying that, it is still the original coil pack
__________________
IF YOU CANT FIX IT WITH A SCREWDRIVER OR SHIFTER , F%$K IT with a hammer - Light travels faster than sound.......this is why some people appear bright until you hear them speak! AU SERIES 3 LIQUID SILVER BBS MOTORSPORT RIMS , EIBACHS , BILSTEINS , CERAMIC COATED 4499 PACIE'S , 2.5 S/S GENIE SYSTEM , MAGNAFLOWS , METALCAT 200cpsi , CAI MODS 123.4 GROUND TEARING RWKW'S , LOL |
||
Thread Tools | |
Display Modes | |
|