|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-09-2010, 02:52 PM
|
#1 | ||
|
Regular Member
Join Date: Jun 2005
Location: Canberra
Posts: 73
|
Hey fellas,
My mum has a 2005 Focus and when we got it it did not have the rear seats in it, we have since got some rear seats for it but i went to put them in and i cant get the actual bracket off the seat (back) off so i can bolt it to the body 1st and then fit the actual back of the seat back onto the bracket. I worked out that u need to do this to be able to get to the bolts and bolt it down. Can anyone give me some advice??? Let me know if that doesnt make sense too. Cheers Dylan |
||
|
|
|
10-09-2010, 09:02 PM
|
#2 | ||
|
Regular Member
Join Date: Apr 2006
Posts: 127
|
from memory - bad memory.
Bolts go through the bracket. you should not need to remove them. Seat backs in first and the base last. |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Back seats in a 2005 Focus
Linear Mode
