|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
19-11-2011, 12:46 PM
|
#1 | ||
|
Regular Member
Join Date: Jan 2006
Posts: 96
|
Hi guys,
My apologies having to post again on this subject, I should have asked this in my previous thread. Could some one tell me for sure if the return line to the tranmission on the radiator is at the top or bottom ( au1 forte ) of the rad. Also, using the cooler in junction with the radiator cooler would i connect the cooler to this line.I'm undecided at this time whether to by-pass the rad completely. thanks again |
||
|
|
|
19-11-2011, 01:56 PM
|
#2 | ||
|
RIP...
Join Date: Dec 2004
Posts: 15,524
|
I can't remember which is in/out on the radiator, but it doesn't really matter anyhow as you most certainly should bypass it.
The internal radiator cooler is a very very dumb idea.
__________________
. Oval Everywhere... |
||
|
|
|
|
19-11-2011, 04:00 PM
|
#3 | ||
|
Donating Member
 Join Date: Aug 2006
Posts: 5,142
|
Agreed. Bypass it completely, the internal "cooler" only suceeds in making the fluid hotter again.
|
||
|
|
|
|
19-11-2011, 05:22 PM
|
#4 | ||
|
Regular Member
Join Date: Jan 2006
Posts: 96
|
Thanks for the replies guys
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
transmission cooler again
Linear Mode
