|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
15-08-2012, 02:43 PM
|
#1 | ||
|
Regular Member
Join Date: Jun 2012
Posts: 244
|
Are they the same offset and stud pattern on the Foulcoon as the Mondy?
|
||
|
|
|
15-08-2012, 04:14 PM
|
#2 | ||
|
Regular Member
Join Date: Feb 2012
Posts: 305
|
Unfortunately no, Falcon PCD is 5x114.3, current Mondeo is 5x108 and early stuff is 4 x 108.
|
||
|
|
|
|
15-08-2012, 05:01 PM
|
#3 | ||
|
Jag built with Ford money
Join Date: Aug 2012
Location: in Sydney traffic...
Posts: 206
|
5x108 as it turns out is same as Jaguar X-Type, S-Type & XF, XJ from 03 onwards and the XK range 2006 onwards but you need to be careful of the offset.
Also regarding the center bore, depending on who you talk to Mondy is listed as 63.3mm, and the Jags as 63.4mm & 63.5mm. It's all the same since these 0.1mm variations are smaller than the tolerances on a produced wheel! Once you have the offset of your existing wheel and the proposed wheel, have a look here Wheel-Tire - RIMSnTIRES.com
__________________
Ex: AU XR6, Mondeo ST200, AU3 TE50, NC Fairlane 5.0, XE ESP Turbo, XY Ute, XD ESP with a 351 Also have a Land Rover, and another Jag, somewhere...
|
||
|
|
|
|
15-08-2012, 05:07 PM
|
#4 | ||
|
Jag built with Ford money
Join Date: Aug 2012
Location: in Sydney traffic...
Posts: 206
|
Oh and BTW 5x108 is also used by Volvo, and a number of other Ford models...
http://www.wheelfitment.eu/PCD/5x108/63.3/ http://www.wheelfitment.eu/PCD/5x108/63.4/ http://www.wheelfitment.eu/PCD/5x108%20/63.5/ Don't take those listed offsets for granted, the correct offset changes depending on the width of the rim...
__________________
Ex: AU XR6, Mondeo ST200, AU3 TE50, NC Fairlane 5.0, XE ESP Turbo, XY Ute, XD ESP with a 351 Also have a Land Rover, and another Jag, somewhere...
|
||
|
|
|
|
16-08-2012, 02:55 PM
|
#5 | ||
|
Regular Member
Join Date: Jun 2012
Posts: 244
|
Thanks Cambo. I have noted (for better or worse) that there seems to be a few interchangeable bits with Volvos. What is the world coming to?
|
||
|
|
|
|
16-08-2012, 03:33 PM
|
#6 | ||
|
Jag built with Ford money
Join Date: Aug 2012
Location: in Sydney traffic...
Posts: 206
|
You'd be surprised at the parts interchangeability between certain Fords, Volvos & Jaguars...
__________________
Ex: AU XR6, Mondeo ST200, AU3 TE50, NC Fairlane 5.0, XE ESP Turbo, XY Ute, XD ESP with a 351 Also have a Land Rover, and another Jag, somewhere...
|
||
|
|
|
|
16-08-2012, 05:58 PM
|
#7 | ||
|
Regular Member
Join Date: Jun 2012
Posts: 244
|
I think I will keep quiet about the Jag bit after ragging a friend out for so many years about having one. Mind you it was one of the old clunkers not the newer hoop da ones.
|
||
|
|
|
|
16-08-2012, 06:06 PM
|
#8 | ||
|
Jag built with Ford money
Join Date: Aug 2012
Location: in Sydney traffic...
Posts: 206
|
Ha Ha!
Yes they've come a long way since the 70's & 80's mate.
__________________
Ex: AU XR6, Mondeo ST200, AU3 TE50, NC Fairlane 5.0, XE ESP Turbo, XY Ute, XD ESP with a 351 Also have a Land Rover, and another Jag, somewhere...
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Falcon rims for Mondeo?
Linear Mode
