![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
Race Brakes Sydney Street and race performance pad / rotor combinations as well as brake upgrades and Exedy clutch kits. Website Link |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Whoop!
Join Date: May 2009
Posts: 44
|
Hi,
I've got RDA7934S for the front of my FG XR8. From what I've read, matching rotors for the rear are RDA505S. Can you give me a price delivered to 3350 for them? Thanks, Sam.
__________________
FG XR8 Ute ![]() Luxury Pack, Herrod Catback, BPR CAI, Pedders Bits |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Whoop!
Join Date: May 2009
Posts: 44
|
From what I've read, it's recommended to change the pads at the same time as the rotors?
Can you please add to the quote, Remsa pads for front and back (they seem to be ok from what I've read. I'm no racer!). Cheers, Sam.
__________________
FG XR8 Ute ![]() Luxury Pack, Herrod Catback, BPR CAI, Pedders Bits Last edited by SJFALK; 02-01-2013 at 08:33 PM. |
||
![]() |
![]() ![]() |
![]() |
#3 | ||||
Race Brakes Sydney
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,613
|
Quote:
Quote:
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop Street to track is what we expertise in Phone 02 9609 1101 sales@racebrakessydney.com.au www.racebrakessydney.com.au |
||||
![]() |
![]() ![]() |
![]() |
#4 | ||
Whoop!
Join Date: May 2009
Posts: 44
|
Thanks for the information. I haven't put the RDA7934S on the front yet (bought them for $90 so I might lean towards the new design for everything.
Is the new design and materials that RDA are beginning to use better than the old in terms of durability? Less rust? Are there different part numbers? Cost differences? And last question, when will they be available? Thanks very much, Sam.
__________________
FG XR8 Ute ![]() Luxury Pack, Herrod Catback, BPR CAI, Pedders Bits |
||
![]() |
![]() ![]() |
![]() |
#5 | |||
Race Brakes Sydney
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,613
|
Quote:
The new style is available now and the old style takes about a week or so to do.
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop Street to track is what we expertise in Phone 02 9609 1101 sales@racebrakessydney.com.au www.racebrakessydney.com.au |
|||
![]() |
![]() ![]() |
![]() |
#6 | ||
Whoop!
Join Date: May 2009
Posts: 44
|
Thanks for answering all of my questions Matt. Sounds like I shouldn't have jumped the gun and bought the old style rotors for the front! The new ones sound much better.
So for 4 rotors and pads, I'd be looking at around $465 delivered (if my calculations are right). One last question: I've just had my car serviced (within 1000kms), and they put new rear pads in, are they new enough to not be a problem with new rotors (I'm no racer). What am I looking at for 4 rotors and pads for the front if the rears are ok? Sam.
__________________
FG XR8 Ute ![]() Luxury Pack, Herrod Catback, BPR CAI, Pedders Bits |
||
![]() |
![]() ![]() |
![]() |
#7 | |||
Race Brakes Sydney
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,613
|
Quote:
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop Street to track is what we expertise in Phone 02 9609 1101 sales@racebrakessydney.com.au www.racebrakessydney.com.au |
|||
![]() |
![]() ![]() |
![]() |
#8 | ||
Whoop!
Join Date: May 2009
Posts: 44
|
Thanks Matt. I'll shoot you a PM when I'm ready to go. Is this the new design?
![]()
__________________
FG XR8 Ute ![]() Luxury Pack, Herrod Catback, BPR CAI, Pedders Bits |
||
![]() |
![]() ![]() |
![]() |
#9 | |||
Race Brakes Sydney
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,613
|
Quote:
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop Street to track is what we expertise in Phone 02 9609 1101 sales@racebrakessydney.com.au www.racebrakessydney.com.au |
|||
![]() |
![]() ![]() |
![]() |
#10 | ||
Loving The Blown Goodness
Join Date: Jan 2010
Location: Toowoomba, Qld
Posts: 2,258
|
G'day Matt. I am looking at getting the front rotors off SJFALK. Will they fit my BF2 XR8? If so could you please send me a PM with cost and postage to Toowoomba for the same style rear rotors. I will grab them off you.
__________________
Gone To Wrecking Heaven 2007 BFII XR8 Sedan Ego Previous 2003 BA XR8 Ute Phantom Ford Forum Build Thread The Project 1991 EB XR8 Sedan Monza Red Project Build Thread
|
||
![]() |
![]() ![]() |
![]() |
#11 | ||
Race Brakes Sydney
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,613
|
Yes the 322mm rotors and having the series 2 BF XR8 you should have the rear solid 303mm disc correct? These rear rotors have to be slotted and would cost $165 plus $28 freight. And would take 1 to 2 weeks to get.
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop Street to track is what we expertise in Phone 02 9609 1101 sales@racebrakessydney.com.au www.racebrakessydney.com.au |
||
![]() |
![]() ![]() |
![]() |
#12 | ||
Loving The Blown Goodness
Join Date: Jan 2010
Location: Toowoomba, Qld
Posts: 2,258
|
I am pretty sure that is correct. I will check when I get home tomorrow. If that is correct I will send you PM and get this underway.
__________________
Gone To Wrecking Heaven 2007 BFII XR8 Sedan Ego Previous 2003 BA XR8 Ute Phantom Ford Forum Build Thread The Project 1991 EB XR8 Sedan Monza Red Project Build Thread
|
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#13 | ||
Whoop!
Join Date: May 2009
Posts: 44
|
Sweet guys. Once Perko is organised Matt...I'll lock in my order.
__________________
FG XR8 Ute ![]() Luxury Pack, Herrod Catback, BPR CAI, Pedders Bits |
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#14 | ||
Loving The Blown Goodness
Join Date: Jan 2010
Location: Toowoomba, Qld
Posts: 2,258
|
G'day Matt. The rears are solids. Could you please send me a PM with bank details so that we can get this started.
__________________
Gone To Wrecking Heaven 2007 BFII XR8 Sedan Ego Previous 2003 BA XR8 Ute Phantom Ford Forum Build Thread The Project 1991 EB XR8 Sedan Monza Red Project Build Thread
|
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
Thread Tools | |
Display Modes | |
|